Controlling the TV
You can control your TV using the buttons below.
By pressing | You can |
TV [/1 | Turn the TV on or off. |
|
|
TV/VIDEO | Switch the TV’s input source |
| between the TV and other input |
| sources. |
Switching between TV and DVD
Using the CONTROL DVD/TV switch, you can switch the remote signal between control of the TV and control of the DVD unit. When you watch the DVD, ensure that you have the CONTROL DVD/TV switch set to DVD.
The table below shows the buttons that are affected by the CONTROL DVD/TV switch.
Button | DVD | TV |
1~9,** | Standard number | Regardless of |
>10, | button function | the number |
10/0 | for DVD. | button pressed, |
|
| the channel |
|
| advances in |
|
| numerical order. |
ENTER | Standard enter | Skips to channel |
| function for | 12. |
| DVD. |
|
|
| |
. Standard | CH – | |
| preceding title, |
|
| chapter skip |
|
| function for |
|
| DVD. |
|
>Standard forward CH + title, chapter
skip for DVD.
3 | VOL + | VOL + |
# | VOL – | VOL – |
|
|
|
Note
Depending on the TV, you may not be able to control your TV or to use some of the buttons above.
*Use the number buttons only to enter the code number of controllable TVs.
**For double digit number, press >10, then the number. (For example, press >10, then 2 and 5 for entering 25.)
Watching the Video or other Unit
You can use VCRs or other units connected to the VIDEO 1 or VIDEO 2 jacks. Refer to the operation manual supplied with the unit for farther information on the operation.
1 2 3 
FUNCTION
4 5 6
7 8 9
>10 10/0
Press FUNCTION repeatedly until |
| ||
| |||
VIDEO 1 or VIDEO 2 that you connected |
| ||
Other | |||
the unit to appears on the front panel | |||
| |||
display. |
| ||
Each time you press FUNCTION, the mode | Operations | ||
of the system changes in the following | |||
| |||
sequence. |
| ||
DVD t VIDEO 1 t VIDEO 2 t |
| ||
TUNER t DVD... |
| ||
|
|
| |
59