%%IncludeFeature:criscrlf(value)Purpose: Controls the default line termination mode (the
<ESC>&k#G command). Specifies the line
termination tr eatment of a c arriage return .
value: off (treat line feed as a line feed) or on (treat line feed
as a carriage return-line feed combination).
The result of various settings for these parameters is
shown in table below, in terms of the equivalent code
passed to the PCL line termination command
(<ESC>&k#G). The second setting (lfiscr lf on, crisc rlf
off) is correct for most ASCII listings printed from
UNIX machines. PC listings should usually be done
with both items set to off, and Macintosh listings
usually require the third setting (lfiscrlf off, criscrl f on).
The following table shows the criscrlf/lfiscrlf
commands and the corresponding PCL Line
Termination command par am et er s.
LFISCRLF CRISCRLF PCL Code Comments
Off Off 0 CR is CR, LF is L F, FF is FF
On Off 2 CR is CR, LF is CR-LF, FF is
CR-FF
Off On 1 CR is CR-LF, LF is LF, FF is
FF
On On 3 CR is CR-LF, LF is CR-LF, FF
is CR-FF
%%IncludeFeature:lfiscrlf (value)Purpose: Controls the default line termination mode (the
<ESC>&k#G command); specifies the line
termination tr eatment of a l inefeed.
value: off (treats linefeed as a linefeed) or on (treats linef ee d
as carriage return-linefeed combination).
The result of various settings for these parameters is
shown in the table included in the Set Carriage Return
(Line Termination) discussion, in terms of the
Appendix D
Additional Technical Information D-23