and default varies depending upon the amount of RAM available
on your system.
If not enough memory is available for this client , some o r all of the
optional hard disks may not be accessible and/or an insufficient
number of disk cache blocks may be available.
Administration/Memory/MB Printer Mem
This memory client cannot be changed: it is the amount of RAM
installed in the printer that is available to be split among the other
memory clients.
NOTE: This isn’t the same as the amount of physical RAM
present in the printer. Because the downloaded system
software occupies approximately 3 MB, the amount of
physical RAM required will be 3 MB more than the
amount of RAM available to conf igurable memory
clients.
Chapter 4
Printer Configuration 4-45