IBM 22P7035 Installing the drive, Opening the computer, Unpacking the drive,
3IDE connector

Rear view of the drive

Pin 1

1Audio-out connector

This connector transmits the analog audio signals to an audio adapter.

2Configuration pins

These pins are used to set the drive configuration.

3IDE connector

This connects the CD-RW/DVD-ROM Combination Drive to the IDE cable.

4Power connector

This connects the CD-RW/DVD-ROM Combination Drive to the power cable.

Installing the drive

Follow these steps to install the CD-RW/DVD-ROM Combination Drive:

Step 1. Opening the computer

1.Turn off the computer and all attached devices.

2.Unplug all power cords from the computer and all attached devices.

3.Remove the cover from the computer. Refer to your computer documentation for instructions on removing the computer cover.

Step 2. Unpacking the drive

1.Before opening the antistatic bag that the drive is packed in, touch the bag to an unpainted metal surface for at least two seconds. This drains the static electricity from the package and your body.

2.Remove the drive from the bag.

If you must put the drive down, place the antistatic bag on a flat, padded surface, such as a magazine, and place the drive on the antistatic bag.

1-4IBM 48X/24X/48X/16X Max CD-RW/DVD-ROM Combination Drive: User’s Guide