IBM 22P7035 manual Enabling DMA for Windows XP, Click on the Advanced Settings tab

10.Click Close to close the System Properties window. A message is displayed, informing you that the system settings have changed.

11.Click OK to restart the computer.

Enabling DMA for Windows XP

To change the DMA parameter setting from the Windows XP desktop, do the following:

1.Click Start --> Control Panel.

2.Click Switch to classic view.

3.Double-click System.

4.Click the Hardware tab.

5.Click the Device Manager button.

6.Click on the IDE ATA/ATAPI controller to expand the tree.

7.Double-click on the controller that corresponds to where your CD-RW is located (Primary IDE or Secondary IDE).

8.Click on the Advanced Settings tab.

9.Select the appropriate Transfer Mode pull-down that corresponds to the CD-RW location, (Device 0 for Master, Device 1 for Slave).

10.Select DMA if it is available.

11.Click OK.

C-2IBM 48X/24X/48X/16X Max CD-RW/DVD-ROM Combination Drive: User’s Guide