Front left speaker distance setting, 10 dB | Pioneer VSX-D712

100Hz 150Hz

Setting up the receiver

06

We recommend setting this to 200Hz if your S speakers are smaller bookshelf-type speakers.

• Use or to specify the crossover frequency for your small speakers (100 Hz, 150 Hz or 200 Hz).

100Hz 150Hz

200Hz

100Hz

Sends bass frequencies below 100 Hz to the subwoofer (or L speakers).

150Hz

Sends bass frequencies below 150 Hz to the subwoofer (or L speakers).

200Hz

Sends bass frequencies below 200 Hz to the subwoofer (or L speakers).

• Use or to set the attenuation

level (0 dB, 10 dB or dB(∞)).

0 dB

10 dB

∞(displays )

•When ∞ is selected ( appears in the display), LFE cannot be heard.

Front left speaker distance setting

• Default setting: 10 ft.

Sets the distance from the front left speaker to the listening position.

• Use or to set the distance of the front left speaker from the main listening position (within the range of 0.5 ft. to 45 ft.).

•If all speakers (front, center, and surround) are set to L, the crossover frequency can’t be set because there are

no S speakers ( appears in the display).

LFE attenuator setting

• Default setting: 0 dB

Dolby Digital and DTS audio sources include ultra-low bass tones. Set the LFE attenuator as necessary to prevent the ultra-low bass tones from distorting the sound from the speakers.

Center speaker distance setting

• Default setting: 10 ft.

The center speaker is normally placed directly in the front of the listening room and closer to the listening position than the front speakers. This means that the sound from the center speaker will be heard before the front speakers. To prevent this, set the center speaker distance setting to delay the sound from the center speaker so that the sound from the front and center speakers will be heard at the same time.

47

En

Image 47

Pioneer VSX-D712 Front left speaker distance setting, LFE attenuator setting, Center speaker distance setting, 10 dB

Contents

Operating Instructions VSX-D712 VSX-D812AUDIO/VIDEO MULTI-CHANNELRECEIVER Wash hands after handling IMPORTANT NOTICEPage 01 Before you start Contents03 Connecting up 06 Setting up the receiver 10 Additional information 07 Using the tuner08 Making recordings 09 Controlling the rest of your system Checking what’s in the box Installing the receiverBefore you start 01Before you start Chapter Before you start Operating range of the remote control unit Introduction to home theater 5 minute guide025 minute guide Chapter 2 Hook up your TV 5 minute guideListening to Surround Sound 1 Hook up your DVD player VSX-D712 025 minute guidePowered Front speakers Front speakers 5 minute guide Surround back speaker or subwoofer 6Play a DVD, and adjust the volume to your liking025 minute guide VSX-D812 7.0ch 5 minute guide Using the Quick Setup2.0ch 3.0ch 025 minute guide FWD MID BACK S-videocables Connecting upConnecting up Chapter Audio/Video cords DVD player 03Connecting up Connecting digital componentsThis receiver CD recorder Satellite tuner CD player CD player CD-R/Tape/MDdeck Connecting upConnecting audio components This receiver Connecting DVD multi-channelcomponents 03Connecting up Connecting up Connecting video componentsConnecting to the front panel video terminal Antenna snap connectors 03Connecting up Connecting antennasFM wire antenna Using external antennas FRONT Connecting the speakers VSX-D712Connecting up ASSIGNABLE Surround speakers 03Connecting up Connecting the speakers VSX-D812Powered subwoofer Connecting up Hints on speaker placementSpeaker terminals A and B speaker systems 03Connecting up Overhead view of 5.1 channel speaker setup3-Dview of 5.1 channel speaker setup Overhead view of 6.1 channel speaker setup Connecting up 3-Dview of 6.1 channel speaker setupOverhead view of 7.1 channel speaker setup 3-Dview of 7.1 channel speaker setup Surround back 03Connecting up Connecting additional amplifiersVSX-D812 VSX-D712 Connecting up Power cord cautionAC outlet Receiver Operating other Pioneer components03Connecting up Front panel Controls and displaysControls and displays Chapter 04Controls and displays See Using the Quick Setup on page Controls and displays Display 13ADV.SURR. Advanced Surround 15TUNER indicators STEREO16Master volume level 04Controls and displays 13 14 Controls and displays Remote control FL DIMMER 04Controls and displays Controls and displays D.ACCESS Stereo/Direct Playing sources05Playing sources Chapter Introduction to Sound Modes Neo 6 Music MUSIC Choosing the input signalPlaying sources Advanced Surround modes DVD 5.1 ch 05Playing sourcesListening to multi-channelplayback AUTO EXPANDED GAME Using Stereo/DirectUsing Advanced Surround 6-STEREO SB ON SB OFF SB AUTO 05Playing sources Using the Surround BackChannel SB CH Playing sources Using the Virtual Surround Back mode VSBVSB ON VSB OFF VSB AUTO MIDNIGHT Off LOUDNESS Using Midnight and Loudness listeningUsing the tone controls Playing other sources Selecting the multi-channelanalog inputs Using the sleep timerThe sleep timer switches the receiver into control to set the sleep timer Choosing your receiver setup Setting up the receiver06Setting up the receiver Chapter Speaker setting Setting up the receiver Crossover frequency setting 06Setting up the receiverSubwoofer setting Surround back speaker setting 100Hz 150Hz 200Hz Front left speaker distance settingLFE attenuator setting Center speaker distance setting Surround left speaker distance setting Surround back speaker distance settingFront right speaker distance setting Surround right speaker distance setting Dual mono setting Subwoofer distance settingDynamic range control setting Component video input settings Optical digital Surround back channel input settingDigital input settings Coaxial digital Setting up the receiver Manually calibrating your listening area MCACCR C LS SW SB RS R C LS SW SB RS L C R RS SW LS SB06Setting up the receiver The receiver returns to the Standard mode Setting up the receiver Listening to the radio Using the tuner07Using the tuner Chapter Tuning directly to a station Saving station presets Using the tuner Listening to station presets 07Using the tunerNaming station presets Making recordings The receivers volume, balance, tonesignal Making recordings 09Controlling the rest of your system Chapter Setting the remote to control other componentsSelecting preset codes directly Controlling the rest of your system Direct function Clearing all the remote control settingsControlling the rest of your system Function 09Controlling the rest of your systemControls for TVs Buttons Function Controls for other componentsButton s Controlling the rest of your system Components 09Controlling the rest of your systemButton s Function TUNER Preset Code ListSTB SATELLITE On digital STB TEAC 09Controlling the rest of your systemSONY YAMAHA 315 , 314 , 328, MD Additional information TroubleshootingProblem Additional information Remedy 10Additional informationProblem Additional information Resetting the main unit Signal-to-NoiseRatio 10Additional information SpecificationsContinuous power output stereo Continuous power output surround Furnished parts Cleaning the unitAM tuner section Miscellaneous 10Additional information Additional information PIONEER EUROPE NV PIONEER CORPORATIONPIONEER ELECTRONICS USA INC PIONEER ELECTRONICS OF CANADA, INC