Connecting up
Chapter 3:
Connecting up
•Before making or changing any connec- tions, switch off the power and discon- nect the power cord from the AC outlet.
Audio/Video cords
Use audio/video cords (not supplied) to connect the audio/video components and a video cord to connect the monitor TV.
Connect red plugs to R (right), white plugs to L (left), and the yellow plugs to VIDEO.
Be sure to insert completely.
R | L |
|
VIDEO
S-video cables
Use
Connect from an
Be sure to insert completely.
S VIDEO
03
Component video cords
Use component video cords to get the best possible color reproduction of your video source. The color signal of the TV is divided into the luminance (Y) signal and the color (PB and PR) signals and then output. In this way, interference between the signals is avoided. Connect from the component video jacks on the rear of the receiver to the compo- nent video jacks on the video component you are hooking up.
| Y | |
| P | |
Green | B | |
P | ||
Blue | ||
R | ||
| Red |
Digital audio coaxial cords/ Optical cables
Commercially available digital audio coaxial cords (standard video cords can also be used) or optical cables (not supplied) are used to connect digital components to this receiver.
Be sure to insert completely.
Digital audio coaxial cord | Optical cable | ||
(or standard video cord) |
| ||
|
|
|
|
|
|
|
|
15
En
