
04Controls and displays
9 STATION +/– buttons
Selects station presets when using the tuner (page 55).
10 TUNING +/– buttons
Selects the frequency when using the tuner (page 54).
11LISTENING MODE buttons
STANDARD
Press for Standard decoding and to switch between the various Pro Logic II and Neo:6 options (page 38).
ADVANCED SURROUND
Use to switch between the various surround modes (page 39).
STEREO/DIRECT
Switches between direct and stereo play- back. Direct playback bypasses the tone controls and channel levels for the most accurate reproduction of a source (page 39).
12SIGNAL SELECT
Use to select an input signal (page 37).
13 MIDNIGHT/LOUDNESS
Use Midnight when listening to movie soundtracks at low volume. Use Loudness to boost the bass and treble at low volume (page 42).
14 SPEAKERS
Use to cycle through the speaker system:
AB A+B (page 23)
15 SB CH MODE
Selects the surround back channel mode (page 40) and the Virtual Surround Back (VSB) mode (page 41).
16 TONE
Press this button to access the bass and treble controls, which you can then adjust with the MULTI JOG dial (page 42).
17 QUICK SETUP
See Using the Quick Setup on page 13.
30
18 VIDEO INPUT
See Connecting to the front panel video terminal on page 19.
19 FL DIMMER
Use this button to make the fluorescent display (FL) dimmer or brighter.
20 INPUT ATT
Use to attenuate (lower) the level of an analog input signal to prevent distortion.
21 MPX
Press to receive a radio broadcast in mono (page 54).
22 BAND
Switches between AM and FM radio bands (page 54).
23 CLASS
Switches between the three banks (classes) of station presets (page 55).
24 TUNER EDIT
Press to memorize and name a station for recall (page 55).
En