Connecting up
•If you’re not using a subwoofer, change the front speaker setting (see Speaker setting on page 45) to large.
•
AC outlet
Power supplied through this outlet is turned on and off by the receiver's power switch. Total electrical power consumption of connected equipment should not exceed 100 W (0.8 A).
AC OUTLET
SWITCHED 100 W MAX 0.8 A MAX
•Do not connect a monitor, TV set, heater, or similar appliance to this unit’s AC outlet.
•Do not connect appliances with high power consumption to the AC outlet in order to avoid overheating and fire risk. This can also cause the receiver to malfunction.
03
•Make sure no exposed speaker wire is touching the rear panel, this may cause the receiver to turn off automatically.
•This unit should be disconnected by removing the power plug from the wall socket when not in regular use (ex. when on vacation).
Power cord caution
Handle the power cord by the plug. Do not pull out the plug by tugging the cord and never touch the power cord when your hands are wet as this could cause a short circuit or an electric shock. Do not place the unit, a piece of furniture, etc., on the power cord, or pinch the cord. Never make a knot in the cord or tie it with other cords. The power cords should be routed such that they are not likely to be stepped on. A damaged power cord can cause a fire or give you an electrical shock. Check the power cord once in a while. When you find it damaged, ask your nearest Pioneer authorized service center or your dealer for a replacement.
27
En
