Pioneer VSX-D712 manual Setting up the receiver, Speaker setting

Setting up the receiver 06

Surround right speaker distance setting (page 48)

Specify the distance from your listening position to your surround right speaker.

Surround back speaker distance setting (page 48)

Specify the distance from your listening position to your surround back speakers.

Surround left speaker distance setting (page 48)

Specify the distance from your listening position to your surround left speaker.

Subwoofer distance setting (page 48) Specify the distance from your listening position to your subwoofer.

Dynamic range control setting

(page 49)

Compress the dynamic range of the sound track.

Dual mono setting (page 49) Isolate one channel when listening to discs with dual mono encoding.

Component video input settings (page 49)

Specify the components to be assigned to the component video inputs (below).

•Component video 1 input setting

•Component video 2 input setting

Surround back channel input setting (VSX-D812 only) (page 49)

Specify the number of surround back inputs you have connected.

Digital input settings (page 50) Specify the components to be assigned to the digital inputs (below).

•Coaxial digital input 1 setting

•Coaxial digital input 2 setting

•Optical digital input 1 setting

•Optical digital input 2 setting (VSX- D812 only)

4 Use or to adjust the setting.

The setting is entered automatically.

5Repeat steps 3 and 4 to adjust other setup options.

6When you’re done, press ENTER to exit.

•The setting display is automatically exited after 3 minutes of inactivity.

Speaker setting

•Default setting: FL-CS-SS(If a subwoofer is detected when you turn the receiver on, the default is FS-CS-SS.)

You must let the receiver know how many speakers you have, and how big they are. The size you choose (large or small) determines how much bass is sent from the receiver to the speakers.

In the display, F, C, and S refer to front, center, and surround speakers respectively. Speaker size is denoted as L for large speakers, S for small speakers, and (asterisk) if no speaker is connected.

•If the cone size (diameter) of the speaker is larger than 5 inches, set the speaker size to L.

•If you’re not using a subwoofer, we recom- mend setting the front speakers to L.

•Cycle through the available choices

using or and choose a configuration that matches your speaker setup.

45

En