05Playing sources, Auto, DVD 5.1 ch, Digital | Pioneer VSX-D712

05Playing sources

05Playing sources

•Press SIGNAL SELECT (front panel) to select the input signal corresponding to the source component.

Each press cycles through the options as follows:

				AUTO
				AUTO
						DVD 5.1 ch/
	DIGITAL					DVD 5.1 ch/
	DIGITAL					DVD 7.1 ch
				ANALOG

The AUTO setting automatically switches to DIGITAL if a digital source is detected, other- wise the signal select will be ANALOG.

DVD 5.1ch (VSX-D712) and DVD 7.1ch (VSX- D812) will only appear when DVD/LD is selected.

When set to DIGITAL or AUTO, 2 DIGITAL lights when a Dolby Digital signal is input, and DTS lights when a DTS signal is input.

•This receiver can only play back Dolby Digital, PCM (32kHz–96 kHz) and DTS digital signal formats (however, only the VSX-D812 can decode DTS 96kHz/24 bit signal formats). With other digital signal formats, set to ANALOG.

•You may get digital noise when a LD or CD player compatible with DTS is playing an analog signal. To prevent noise, make the proper digital connections (page 16) and set the signal input to DIGITAL.

•Some DVD players don’t output DTS signals. For more details, refer to the instruction manual supplied with your DVD player.

38

Listening to multi-channel playback

RECEIVER

INPUT SELECT

MULTI CONTROL

DVD/LD	TV/SAT	VCR/DVR	TV CONT
C D	CD-R/TAPE	TUNER
STANDARD

1Switch on the playback component.

2Turn on the power of the receiver.

3Select the source you want to play- back.

Use the MULTI CONTROL buttons (or INPUT SELECT).

4Press STANDARD.

If the source is Dolby Digital, DTS, or Dolby Surround encoded, the proper decoding format will automatically be selected and shows in the display.

If you are listening to a two channel source, each press changes the display as follows:

MOVIE

(2 Pro Logic II)

MUSIC				MUSIC
(Neo:6)				(2 Pro Logic II)
		CINEMA		PROLOGIC
		CINEMA		PROLOGIC
		(Neo:6)

Refer to page 36 for more details about each mode.

En

Image 38

Pioneer VSX-D712 05Playing sources, Listening to multi-channelplayback, Auto, DVD 5.1 ch, Digital, DVD 7.1 ch, Analog

Contents

Operating Instructions VSX-D712 VSX-D812AUDIO/VIDEO MULTI-CHANNELRECEIVER IMPORTANT NOTICE Wash hands after handlingPage 06 Setting up the receiver Contents03 Connecting up 01 Before you start 09 Controlling the rest of your system 07 Using the tuner08 Making recordings 10 Additional information 01Before you start Chapter Installing the receiverBefore you start Checking what’s in the box Operating range of the remote control unit Before you start Introduction to home theater 5 minute guide025 minute guide Chapter 1 Hook up your DVD player 5 minute guideListening to Surround Sound 2 Hook up your TV Front speakers 025 minute guidePowered VSX-D712 5 minute guide Front speakers VSX-D812 6Play a DVD, and adjust the volume to your liking025 minute guide Surround back speaker or subwoofer 3.0ch 5 minute guide Using the Quick Setup2.0ch 7.0ch FWD MID BACK 025 minute guide Audio/Video cords Connecting upConnecting up Chapter S-videocables CD recorder Satellite tuner CD player 03Connecting up Connecting digital componentsThis receiver DVD player This receiver Connecting upConnecting audio components CD player CD-R/Tape/MDdeck 03Connecting up Connecting DVD multi-channelcomponents terminal Connecting video componentsConnecting to the front panel video Connecting up Using external antennas 03Connecting up Connecting antennasFM wire antenna Antenna snap connectors ASSIGNABLE Connecting the speakers VSX-D712Connecting up FRONT Surround speakers 03Connecting up Connecting the speakers VSX-D812Powered subwoofer A and B speaker systems Hints on speaker placementSpeaker terminals Connecting up Overhead view of 6.1 channel speaker setup Overhead view of 5.1 channel speaker setup3-Dview of 5.1 channel speaker setup 03Connecting up 3-Dview of 7.1 channel speaker setup 3-Dview of 6.1 channel speaker setupOverhead view of 7.1 channel speaker setup Connecting up VSX-D712 03Connecting up Connecting additional amplifiersVSX-D812 Surround back Connecting up Power cord cautionAC outlet Receiver Operating other Pioneer components03Connecting up Chapter Controls and displaysControls and displays Front panel See Using the Quick Setup on page 04Controls and displays Display Controls and displays 04Controls and displays 15TUNER indicators STEREO16Master volume level 13ADV.SURR. Advanced Surround Controls and displays Remote control 13 14 04Controls and displays FL DIMMER D.ACCESS Controls and displays Introduction to Sound Modes Playing sources05Playing sources Chapter Stereo/Direct Advanced Surround modes Choosing the input signalPlaying sources Neo 6 Music MUSIC AUTO 05Playing sourcesListening to multi-channelplayback DVD 5.1 ch 6-STEREO Using Stereo/DirectUsing Advanced Surround EXPANDED GAME SB ON SB OFF SB AUTO 05Playing sources Using the Surround BackChannel SB CH Playing sources Using the Virtual Surround Back mode VSBVSB ON VSB OFF VSB AUTO Playing other sources Using Midnight and Loudness listeningUsing the tone controls MIDNIGHT Off LOUDNESS control to set the sleep timer Using the sleep timerThe sleep timer switches the receiver into Selecting the multi-channelanalog inputs Choosing your receiver setup Setting up the receiver06Setting up the receiver Chapter Setting up the receiver Speaker setting Surround back speaker setting 06Setting up the receiverSubwoofer setting Crossover frequency setting Center speaker distance setting Front left speaker distance settingLFE attenuator setting 100Hz 150Hz 200Hz Surround right speaker distance setting Surround back speaker distance settingFront right speaker distance setting Surround left speaker distance setting Component video input settings Subwoofer distance settingDynamic range control setting Dual mono setting Coaxial digital Surround back channel input settingDigital input settings Optical digital Setting up the receiver Manually calibrating your listening area MCACCR C LS SW SB RS R C LS SW SB RS L C R RS SW LS SB06Setting up the receiver Setting up the receiver The receiver returns to the Standard mode Tuning directly to a station Using the tuner07Using the tuner Chapter Listening to the radio Using the tuner Saving station presets Listening to station presets 07Using the tunerNaming station presets Making recordings The receivers volume, balance, tonesignal Making recordings Controlling the rest of your system Setting the remote to control other componentsSelecting preset codes directly 09Controlling the rest of your system Chapter Direct function Clearing all the remote control settingsControlling the rest of your system Buttons 09Controlling the rest of your systemControls for TVs Function Controlling the rest of your system Controls for other componentsButton s Function Function 09Controlling the rest of your systemButton s Components On digital STB Preset Code ListSTB SATELLITE TUNER YAMAHA 315 , 314 , 328, MD 09Controlling the rest of your systemSONY TEAC Additional information TroubleshootingProblem Additional information Remedy 10Additional informationProblem Resetting the main unit Additional information Continuous power output surround 10Additional information SpecificationsContinuous power output stereo Signal-to-NoiseRatio Miscellaneous Cleaning the unitAM tuner section Furnished parts 10Additional information Additional information PIONEER ELECTRONICS OF CANADA, INC PIONEER CORPORATIONPIONEER ELECTRONICS USA INC PIONEER EUROPE NV