Setting the Dialing Mode | Radio Shack 43-3815/43-3898 manual

Installing Your Telephone

Ô NOTES Ô

•If you mounted the base on the wall, place the handset with the keypad facing out so the charging contacts make a clean connection to charge the battery pack.

•Using a pencil eraser, clean the charging contacts on the handset and base about once a month.

•If the battery pack becomes weak during a call, the handset beeps and Low Battery appears. You must recharge the battery pack before you can make another call.

•About once a month, fully discharge the battery by keeping the handset off the base until Low Battery flashes. Otherwise, the battery pack loses its ability to fully recharge.

! IMPORTANT !

Be sure the battery pack is properly connected before you try to charge it. The CHARGE/IN USE indicator lights when the handset is on the base, even if the battery pack is not connected.

<43-3898 model only> Handset No.2 appears when you install the battery pack on to the second handset.

3. Replace the cover.

To charge the battery pack, place the handset on the base. The CHARGE/IN USE indicator on the base lights, and Total: 0 and HS1 appear. Ô

Recharge the battery pack when Low Battery appears. !

For the use of the second handset and its charger, see “Using an Optional Handset” on Page 30.

The supplied battery pack should last for about a year. If the battery pack does not hold a charge for more than two hours after an overnight charge, replace it with a new 3.6-volt, 800 mAh battery pack with a connector that fits the socket in the battery compartment. You can order a replacement battery pack through your local RadioShack store. Install the new battery pack and charge it for about 12–15 hours.

If you have trouble replacing the battery pack, take the phone to your local RadioShack store for assistance.

If you are not going to use your phone for an extended period, disconnect the battery pack to increase its usable life.

SETTING THE DIALING MODE

Your phone is set for tone dialing. If you have pulse service, change the dialing mode.

If you are not sure which type of service you have, do this test:

1.Lift the handset and press TALK/FLASH. Listen for a dial tone.

10

Image 10

Radio Shack 43-3815/43-3898 owner manual Setting the Dialing Mode

Contents

4GHz Multi-Handset Telephone Contents Important Safety Instructions Introduction Important Safety Instructions Important Safety Instructions Battery Safety Instructions Save These Instructions On a Desktop Installing Your TelephoneSelecting a Location On a Wall Plate On a Wall Connecting and Charging the Battery Pack Setting the Dialing Mode Setting the HANDSET’S Ringer Volume Turning the BASE’S Ringer ON/ OFF Setting the HANDSET’S Ringer ToneSetting the Handset’s Ringer Tone To select Ringer Tones Turning Auto Talk ON/OFF Turning Caller ID/CALL To select English , Français Storing Your Area CodeSelecting the Language Or Español Making and Receiving Calls To end a speakerphone call, press Speaker Using Redial Adjusting the HANDSET’S VolumeUsing Mute Ringer Mute Using Tone Services on a Pulse Line Using FlashPaging Using Both Handset Speakerphone Switching Between Handset and SpeakerphoneUsing Both the Handset and Speakerphone Transferring a Call Memory Dialing Using a HeadsetUsing a Headset STORING/EDITING Data in the Phonebook ∗ # & space Press SEL/CH. Distinctive Ring appears Entering a PauseMemory Full Reviewing Names Numbers Phonebook Reviewing Names and Numbers in the PhonebookStoring a ONE-TOUCH Speed Dial Number Storing a One-Touch Speed Dial Number CHAIN-DIALING Service Numbers Dialing a Number in Memory Turning Distinctive Ringer ON/OFF Using Caller IDTesting Stored Emergency Numbers Deleting a Number Call Waiting Deluxe Service Using Caller ID Answer/Drop 1st appears Using Ask to HoldConferenced appears Using Conference Reviewing Caller ID Records Caller ID Messages Dialing Numbers from a Caller ID Record ADDING/DELETING the Area CodeStoring a Caller ID Record in Memory Deleting a Single Record Using AN Optional HandsetDeleting Caller ID Records Deleting ALL Records Charging the Battery Pack Using an Optional Handset To select CW Deluxe On or Making and Receiving CallsCaller ID/CALL Waiting Making and Receiving Calls Using the Menu Button NEW Message IndicatorAnswering System Operation Setting the DAY/TIME Setting the Number of Rings Setting the Recording Time Setting the Message Alert Selecting the Outgoing Message Selecting the Message Language Setting the System to Answer Calls RECORDING/DELETING AN Outgoing Message Recording Incoming Messages Setting the System to Answer CallsScreening Calls Recording Incoming Messages Playing Messages Recording a MemoRecording a Conversation Recording a Memo Deleting Messages Adjusting the VolumeDeleting Messages Remote Operation Handset Remote Operation Setting the Security Code Using Remote Commands Press # then Care Service and RepairFCC Statement FCC Wants YOU to Know Information Surge Protection Troubleshooting Problem Suggestion RadioShack Corporation