system answers and avoid unnecessary long- distance charges. If the message memory is full, the system answers after about ten rings regardless of the ring time setting.
1.Press MENU three times. The system announces “Ring time,” and then announces the current setting. 2, 4, 6, or ts appears.
2.Repeatedly press gor f until the desired number appears.
3.Press SET/RING to store the setting.
4.Press PLAY/STOP to exit.
SETTING THE RECORDING TIME
You can set the recording time to 1, 4, or Announce Only to determine how the system records incoming messages. The 1 and 4 settings let callers leave a message up to 1 or 4 minutes long after the system plays the outgoing message. The Announce Only setting does not let callers leave a message after the system plays the outgoing message.
1.Press MENU four times. The system announces “Record time” followed by the current setting, and then the current setting and 1, 4 or A appear.
2.Repeatedly press gor f until the desired number appears.
3.Press SET/RING to store the setting.
4.Press PLAY/STOP to exit.
SETTING THE MESSAGE ALERT
The Message Alert feature lets you know when you have a new incoming message by sounding a short alert tone every 15 seconds.
1.Press MENU five times. The system announces “Message alert” followed by the current setting. On or Of appears.
Answering System Operation
35
