Installing Your Telephone
3.Insert the supplied AC adapter’s barrel plug into the DC IN 9V jack on the back of the base.
4.Route the adapter’s cord through the strain relief slot on the back of the base.
5.Plug the adapter into a standard AC outlet.
6.Lift the base's antenna to a vertical position.
On a Wall Plate
1.Plug one end of the supplied short modular cord into the TEL LINE jack on the back of the base.
2.Insert the supplied AC adapter’s barrel plug into the DC IN 9V jack.
3.Route the adapter’s cord through the grooves on the bottom of the base.
4.Plug the modular
cord into the wall plate jack. Then align the base's keyhole slots with the wall plate studs and slide the base down to secure it. Plug the adapter into a standard AC outlet.
5. Lift the base’s antenna to a vertical position.
On a Wall
To mount the phone directly on a wall, you need two screws (not supplied) with heads that fit into the keyhole slots on the bottom of the base.
1.Drill two holes 315/16 inches (100 mm) apart. Then thread a screw into each hole, letting the heads extend about 1/8 inch (3 mm) from the wall.
8
