ADDING/DELETING THE AREA CODE
When the area code of the received call is the same as the one you stored (see “Storing your Area Code” on Page 14), the area code does not appear in the Caller ID record. If it is different, the area code appears in the record.
If you want to add or remove the area code from the display, press # when the record is on the display. Press # again to remove or restore the area code.
When you dial a number or store it in memory, the phone dials or stores the number as it appears on the display.
DIALING NUMBERS FROM A CALLER ID RECORD
To dial a local number stored in a Caller ID record, recall the record and press TALK/FLASH. If you have not stored a local area code (see “Storing your Area Code” on Page 14), the phone dials the full 10 digits, including the area code. Ô
To dial a long distance call, press ∗ /TONE (1 appears before the displayed number) before you press TALK/FLASH. If you want to add or delete the area code, press # before you press TALK/FLASH.
STORING A CALLER ID RECORD IN MEMORY
1.Press CID/ . Then recall the record you want
to store.
If it is a long distance number, press ∗ /TONE. Press # to add or delete the area code.
2. | Press | ê |
/SPEED DIAL/ . | ||
3. | Press | or to choose Store in PB? |
| (phonebook locations) or Store in SD? | |
Ô NOTE Ô
If a record does not contain a phone number (if it was blocked by the caller, for example), you cannot dial from that record.
Using Caller ID
29
