Radio Shack 43-3815/43-3898 guide

2.Plug one end of the supplied long modular cord into the TEL LINE jack on the back of the base.

3.Insert the supplied AC adapter's barrel plug into the DC IN 9V jack on the back of the base.

4.Route the adapter

and modular cords through the grooves on the bottom of the base.

5. Align the base's keyhole slots with the mounting screws and slide the base downward to secure it.

6.Plug the modular cord’s other end into the phone jack, and plug the adapter into a standard AC outlet.

7.Lift the base’s antenna to a vertical position.

CONNECTING AND CHARGING THE BATTERY PACK

The phone comes with a rechargeable nickel metal hydride (Ni-MH) battery pack. Before using your phone, you must install the battery pack. Then charge it for about 12–15 hours.

1. Press down and slide off the battery compartment cover.

2. Plug the battery pack’s connector into

the socket in the compartment (the connector ﬁts only one way). Then place the battery pack in the compartment. Handset No.1 appears.

Installing Your Telephone

9

Image 9

Radio Shack 43-3815/43-3898 owner manual Connecting and Charging the Battery Pack

Contents

4GHz Multi-Handset Telephone Contents Introduction Important Safety Instructions Important Safety Instructions Important Safety Instructions Save These Instructions Battery Safety Instructions Installing Your Telephone On a DesktopSelecting a Location On a Wall On a Wall Plate Connecting and Charging the Battery Pack Setting the Dialing Mode Setting the HANDSET’S Ringer Volume Setting the Handset’s Ringer Tone Setting the HANDSET’S Ringer ToneTurning the BASE’S Ringer ON/ OFF To select Ringer Tones Turning Caller ID/CALL Turning Auto Talk ON/OFF Selecting the Language Storing Your Area CodeTo select English , Français Or Español To end a speakerphone call, press Speaker Making and Receiving Calls Using Mute Adjusting the HANDSET’S VolumeUsing Redial Ringer Mute Using Flash Using Tone Services on a Pulse LinePaging Using Both the Handset and Speakerphone Switching Between Handset and SpeakerphoneUsing Both Handset Speakerphone Transferring a Call Using a Headset Using a HeadsetMemory Dialing STORING/EDITING Data in the Phonebook ∗ # & space Entering a Pause Press SEL/CH. Distinctive Ring appearsMemory Full Storing a ONE-TOUCH Speed Dial Number Reviewing Names and Numbers in the PhonebookReviewing Names Numbers Phonebook Storing a One-Touch Speed Dial Number Dialing a Number in Memory CHAIN-DIALING Service Numbers Testing Stored Emergency Numbers Using Caller IDTurning Distinctive Ringer ON/OFF Deleting a Number Using Caller ID Call Waiting Deluxe Service Using Ask to Hold Answer/Drop 1st appearsConferenced appears Using Conference Caller ID Messages Reviewing Caller ID Records ADDING/DELETING the Area Code Dialing Numbers from a Caller ID RecordStoring a Caller ID Record in Memory Deleting Caller ID Records Using AN Optional HandsetDeleting a Single Record Deleting ALL Records Using an Optional Handset Charging the Battery Pack Caller ID/CALL Waiting Making and Receiving CallsTo select CW Deluxe On or Making and Receiving Calls NEW Message Indicator Using the Menu ButtonAnswering System Operation Setting the Number of Rings Setting the DAY/TIME Setting the Message Alert Setting the Recording Time Selecting the Message Language Selecting the Outgoing Message RECORDING/DELETING AN Outgoing Message Setting the System to Answer Calls Screening Calls Setting the System to Answer CallsRecording Incoming Messages Recording Incoming Messages Recording a Conversation Recording a MemoPlaying Messages Recording a Memo Adjusting the Volume Deleting MessagesDeleting Messages Handset Remote Operation Remote Operation Using Remote Commands Setting the Security Code Press # then Service and Repair CareFCC Statement FCC Wants YOU to Know Surge Protection Information Problem Suggestion Troubleshooting RadioShack Corporation