9

The device with the highest SM priority becomes the master SM in the IB network. To configure SM priority, perform the following steps:

1.Enter the enable command to enter Privileged Exec mode.

Example

IBM BladeCenter> enable

IBM BladeCenter#

2.Enter the configure terminal command to enter Global Configuration mode.

Example

IBM BladeCenter# configure terminal

IBM BladeCenter(config)#

3.Enter the ib sm command with

the subnet-prefix keyword

the subnet prefix of the IB network to which the Server Switch belongs

the priority keyword

the priority (integer value) of the SM (where the higher the integer, the higher the priority)

to configure the priority of the SM.

Example

IBM BladeCenter(config)# ib sm subnet-prefix fe:80:00:00:00:00:00:00 priority 1

After you configure your subnet manager priority, connect your Server Switch Module to the outside IB fabric. By default, the external interfaces on your Server Switch Module auto-negotiate speed with the fabric.

NOTE: If your connections auto-negotiate to the wrong speed, bring down the port and bring it back up. If the cable was not plugged in quickly enough, the subnet manager may incorrectly identify it.

Page 53
Image 53
IBM 24R9718 IB manual Subnet-prefix keyword