Figure 5. Remove Slot Cover
__ 7. Find the package that contains the new adapter card.
Attention: Adapter cards are fragile:
vHandle only by the edges
vKeep fingers off printed circuit area
vUse static strap when handling
vLeave in protective packaging until ready to install
Remove the adapter card from the electrostatic package.
__ 8. Install the adapter card in the Expansion unit side of the system unit by doing the following:
a.Align the adapter card with the card slot E07 (Figure 6 on page 7).
b.Slide the card into the system unit and push on both sides of the card until the card is all the way into the slot and the connector.
Note: The screw tab on the adapter card should be even with the frame on the system unit and aligned with the screw hole when completely installed.
c. Install the screw | that holds the adapter card in place, (Figure 6 on |
page 7). |
|
6AS/400e 170 or 250 2809 or 2824 LAN/WAN Workstation Card V4R5
