When you have the following cards, install them in the sequence listed below.
vThe 2809 or 2824 LAN/WAN workstation card
vThe 285x or 2866 Integrated NetFinity cards
vAll other adapter cards
Getting Ready
__ 1. Ensure that all jobs are complete. __ 2. When all jobs are complete, type
pwrdwnsys *immed
on an AS/400 command line and press the Enter key.
Note: Should you encounter difficulties during the installation, contact your authorized dealer or service provider.
__ 3. When the AS/400 is completely powered down, power off all PCs and devices, such as printers and displays, that are connected to the system unit.
__ 4. Unplug any power cords, such as printers and displays, from electrical outlets.
__ 5. Unplug the system unit power cord from the electrical outlet.
__ 6. Remove the system unit back cover by placing your hand near the bottom of the cover and lifting up and out, (Figure 1).
Figure 1. Remove System Unit Back Cover
2AS/400e 170 or 250 2809 or 2824 LAN/WAN Workstation Card V4R5
