Enabling DMA for Windows 2000 Professional
To change the parameter setting for Windows 2000, do the following:
1.Click Start → Settings → Control Panel.
2.
3.Click the Hardware tab.
4.Click Device Manager.
5.Click the IDE ATA/ATAPI controller to expand the tree.
6.Click the device that corresponds to the controller where your
7.Click the Advanced Settings tab.
8.Click Transfer Mode, and select DMA if it is available.
9.Click OK.
10.Click Close to close the System Properties window. A message is displayed informing you that the system settings have changed.
11.Click OK to restart your computer.
2248X/32X/48X Max
