2.The CD might be defective; try another CD.

3.The CD is not ISO-9660 or High Sierra Group-compatible. Check with your place of purchase.

There is no sound from the CD.

Take the following actions:

1.Check that you are using an audio CD and not a data CD.

2.Adjust the sound-adapter volume control. See the documentation that comes with your sound adapter and audio-CD player program.

3.Turn off the computer, unplug the cables from the electrical outlets for your computer and all attached devices, and remove the computer cover. Check that the audio-signal cable connects the 48X/32X/48X Max CD-RW Drive to the sound adapter.

The connectors on the audio cables provided do not fit the connector on your audio adapter.

Some audio adapters might require a special cable. See the documentation that comes with your sound adapter.

You might have to purchase a separate audio cable for the 48X/32X/48X Max CD-RW Drive. The audio-out connector on the 48X/32X/48X Max CD-RW Drive requires a MPC-2 compliant Molex 70553 or equivalent connector. (To locate the drive audio connector, see “Back view of the drive” on page 3.) If you are using an IBM computer or IBM sound adapter, see Appendix E, “IBM Statement of Limited Warranty - Z125-4753-07 - 11/2002”, on page 25 for assistance.

You receive buffer underrunerror messages when copying

CDs or making data CDs.

Take the following actions:

vIf the file source is a network or removable device, copy the files to the local hard disk first.

vIf using CD copier, select Advanced and check the Copy to Hard Disk option.

vIf using RecordNow, select Options->Advanced, and make sure that Burn-Proofis checked.

vTry reducing the write speed.

vMake sure the source and target drives are being operated in DMA mode. See Appendix C, “Customizing the device-driver configuration settings”, on page 21 for more information.

Your computer will not shut down or stand by

vIf you are using an EasyWrite disc, eject it from My Computer.

vIf you have Record Now open, close it.

Your computer hangs at boot-up

vRemove media from the drive and restart.

vCheck with your computer manufacturer for updated BIOS that properly recognize EasyWrite discs.

2048X/32X/48X Max CD-RW Drive: User’s Guide

Page 30
Image 30
IBM 48X manual There is no sound from the CD, Your computer will not shut down or stand by, Your computer hangs at boot-up