![](/images/new-backgrounds/1174371/1743713x1.webp)
IO Processor - The IO processor manages IO operations, primarily to IOA communications adapters and certain peripheral devices. It interfaces the system bus to two
K470 PMC I/O Controller -
The CEC cabinet in an AC system contains an AC/DC power system that provides 3600 watts of N+1 DC power. The AC/DC power system residing in each expansion cabinet (except the AC peripheral cabinet, which has no power) provides 2400 watts of N + 1 DC power.
Continuum systems are also designed to be fully Central Office (CO) installable utilizing
There is no physical control panel on Continuum 600/1200 Series systems. Operating commands are entered at the system console which is connected to the system via the Console Controller card in the CEC cabinet.
2. Operating System Requirements
System
AC systems DC systems
VOS
Minimum release 13.0
Minimum release 14.0.1
FTX
Minimum release 3.0
Minimum release 3.0
3. Hardware Components
NOTE: The hardware components shown in the following tables are at the base minimum revisions approved for operation at the time of publication. For current revision requirements and complete revision history, refer to the HQ Service Support Rev Dir.
3.1 Main Chassis Boards
NOTE: Models
NOTE: Although their descriptions are similar, models G731 thru G748 (sub model 00) are not compatible with models G731 thru G748 (sub model 20). If used together, a sub model mismatch failure will be generated.