Speaker
Note:
vRead “Installation guidelines” on page 23.
vRead the safety notices at AppendixB, “Safety information,” on page 127.
vRead “Handling static-sensitive devices” on page 23.
Complete the following steps to remove the speaker:
1. Turn off the computer and attached devices.
2. Disconnect the power cord from the power source and from the computer; then,
disconnect all external cables.
3. Remove the side cover (see “Removing the side cover” on page 25.
4. Note where the speaker cable connects to the system board; then, carefully
disconnect the cable from the system board.
Note: See the system service label or “System board internal connectors” on
page 72 for system board connector locations.
Speaker retainer
tabs
5. Press the speaker retainer tabs to detach them from the chassis.
6. Grasp the speaker and slide it up to clear the notches, and remove it.
Toinstall the speaker, reverse the previous steps.
70 IntelliStation Z Pro Types6223 and 6227: HardwareMaintenance Manual and Troubleshooting Guide