Bezel-release latch
Before you begin:
vRead AppendixB, “Safety information,” on page 127.
vReview the information in “System reliability considerations” on page 23.
Toremove the bezel-release latch, complete the following steps:
1. Turn off the computer,if it is on.
2. Disconnect the power cord from the power source and from the computer; then,
disconnect all external cables.
3. Remove the side cover (see “Removing the side cover” on page 25).
4. Remove the front bezel (see “Removing the bezel” on page 26).
5. Remove the CD-ROM drive (see “CD-ROM drive” on page 61).
6. Pull down from inside the computer to release the latch tab.
7. From the underside, grasp the bezel-release latch in the center, and gently pull
it back and away from the computer.
Chapter5. Field replaceable units 79