Types 8128, 8187, 8188, 8193, 8414, and 8431

This section lists the physical specifications for the computer.

Dimensions

Height: 140 mm (5.5 in.)

Width: 425 mm (16.7 in.)

Depth: 425 mm (16.7 in)

Weight

Minimum configuration as shipped: 10.0 kg (22 lb)

Maximum configuration: 11.4 kg (25.0 lb)

Environment

Air temperature:

System on: 10° to 35°C (50° to 95° F)

System off: 10° to 43°C (50° to 110° F)

Maximum altitude: 2134 m (7000 ft)

Note: The maximum altitude, 2134 m (7000 ft), is the maximum altitude at which the specified air temperatures apply. At higher altitudes, the maximum air temperatures are lower than those specified.

Humidity:

System on: 8% to 80%

System off: 8% to 80%

Electrical input

Input voltage:

Low range:

Minimum: 90 V ac

Maximum: 180 V ac

Input frequency range: 47–53 Hz

Voltage switch setting: 115 V ac

High range:

Minimum: 137 V ac

Maximum: 265 V ac

Input frequency range: 57–63 Hz

Voltage switch setting: 230 V ac

Input kilovolt-amperes (kVA) (approximate):

Minimum configuration as shipped: 0.08 kVA

Maximum configuration: 0.3 kVA

Note: Power consumption and heat output vary depending on the number and type of optional features installed and the power-management optional features in use.

Heat output (approximate) in British thermal units (Btu) per hour:

Minimum configuration: 257 Btu/hr (75 watts)

Maximum configuration: 785 Btu/hr (230 watts)

Airflow

Approximately 0.51 cubic meters per minute (18 cubic feet per minute) maximum

Acoustical noise-emission values

Average sound-pressure levels:

At operator position:

Idle: 30 dBA

Operating: 32 dBA

At bystander position - 1 meter (3.3 ft):

Idle: 26 dBA

Operating: 30 dBA

Declared (upper limit) sound-power levels:

Idle: 4.0 bels

Operating: 4.3 bels

Note: These levels were measured in controlled acoustical environments according to the procedures specified by the American National Standards Institute (ANSI) S12.10 and ISO 7779 and are reported in accordance with ISO 9296.

Actual sound-pressure levels in a given location might exceed the average values stated because of room reflections and other nearby noise sources. The declared sound-power levels indicate an upper limit, below which a large number of computers will operate.

Chapter 2. General information 7

Page 12 Page 14
Page 13
Image 13
IBM 8196, 8185, 8189, 8195, 8186, 8191, 8197, 8194, 8192, 8190 manual Types 8128, 8187, 8188, 8193, 8414
Page 12 Page 14

8192, 8191, 8196, 8197, 8195 specifications

IBM has been a pioneer in computing technology, and among its extensive line-up of systems, the IBM 8316, 8198, 8199, 8191, and 8434 stand out due to their unique features, advanced technologies, and robust characteristics.

The IBM 8316, often referred to as the IBM 8316 Enterprise, is designed for small to medium-sized businesses seeking reliable processing capabilities. It incorporates a powerful processor that supports high-speed data processing and multitasking. Its main feature includes a modular architecture, which allows for easy upgrades and scalability. It also comes equipped with advanced security features, ensuring that sensitive data remains protected.

The IBM 8198, part of the IBM System i series, offers a blend of both performance and reliability. Its standout characteristic is the integration of IBM's Power Systems technology, which provides exceptional performance for mid-range environments. Features such as high availability and redundancy are built into the infrastructure, allowing businesses to run mission-critical applications seamlessly. Moreover, the IBM 8198 supports a wide array of operating systems, including IBM i, which enhances its versatility for different enterprise needs.

Moving to the IBM 8199, which is well-known for its robust infrastructure, it excels in processing large volumes of transactions. One of its key attributes is the advanced virtualization capabilities that allow multiple operating systems and applications to run concurrently on a single physical machine. This not only improves resource utilization but also reduces operational costs. Businesses can benefit from its comprehensive disaster recovery features, ensuring high uptime and business continuity.

The IBM 8191 further complements this line with its focus on enterprise resource planning systems. It is designed to handle extensive data processing while featuring powerful storage solutions. The integration of AI and machine learning technologies allows businesses to analyze their data seamlessly, turning potential insights into actionable strategies.

Lastly, the IBM 8434 is significant for its high-performance capabilities and reliability. Utilized in data-intensive environments, it supports advanced analytics and business intelligence processing. Key characteristics of the 8434 include exceptional scalability, enabling organizations to grow without significant infrastructure changes. It also features robust backup and recovery features, ensuring that data integrity is maintained at all times.

Together, these IBM systems epitomize the company's commitment to providing innovative, reliable, and scalable computing solutions for businesses of all sizes. Their unique features and technologies make them integral components of modern enterprise IT environments.
Top Page Image Contents