NEC 2000 IPS Data Line Security, Delayed Ringing, Diagnostics, Dial By Name, Dial Conversion

Chapter 9 Feature Descriptions

Data Line Security

This feature allows line circuits that are used for data transmission to be protected from interruptions such as Attendant Camp-On, Executive Override, and Attendant Override.

Delayed Ringing

This feature enables trunks and station lines to ring immediately at the terminating station, but also, after a programmable period of time has elapsed, to ring at secondary Multiline Terminals with that trunk or line appearance.

Diagnostics

To assist maintenance personnel, the

UNIVERGE NEAX 2000 IPS provides diagnostic capabilities such as fault code generation, device status information and alarm information recording which can be accessed from the Maintenance Administration Terminal (MAT) or Customer Administration Terminal (CAT).

Dial By Name

This feature allows a Multiline Terminal user to search for a desired number by name. The number and name are registered in the system and they are shown on Multiline Terminal LCD. The Multiline Terminal user can search for the desired number by name using up or down soft keys. When the Multiline Terminal user finds the desired number, the call can be originated by pressing the Line/Trunk key or going off hook.

Dial Conversion

The system can be assigned to use rotary Dial Pulse (DP) or Dual Tone Multi-frequency (DTMF) trunks and stations. This feature provides for the repeating of digits dialed by the station user onto the C.O. trunks.

Direct Data Entry

This feature allows a maid or other hotel personnel to enter numeric data to the Property Management System (PMS), using the guest room station for entry through dial operation. The same numerical data can be output to a Hotel/Motel Printer by system data programming.

Direct Digital Interface

This service feature provides the capability to connect trunks from the UNIVERGE NEAX 2000 IPS directly to T1 carrier links using either a private or public network.

Direct Inward Dialing (DID)

This feature provides for incoming calls from the exchange network (except FX or WATS) to reach any station within the system without attendant assistance.

DID Call Waiting

This feature allows an incoming call on a DID trunk or a tie line to automatically be Camped-On to the destination station if the destination station is busy.

DID Digit Conversion

This feature allows the UNIVERGE NEAX 2000 IPS to convert the digits received from the serving C.O. to valid station numbers when the C.O. numbering plan differs from the desired station numbering plan.

DID Name Display

This feature allows name assignment for a DID number received from a public network, and displays the name on an LCD of a Multiline Terminal or Attendant Console.

Page 9- 16	UNIVERGE NEAX 2000 IPS Request for Proposal (RFP) Reference Guide
	Issue 6