NEC 2000 IPS manual SPN-4CSIA, Pn-Rta

Chapter 4 Equipment List

Line/Trunk (LT) Cards (Cont.)

Function	Name	Port		Remarks
Wireless Zone	SPN-4CSIA		4-circuit CS interface for U-interface ZT.
Transceiver
		16	Two slot card, 16 LT ports. The PZ-PW122 is
interface
			required.
			Optical Fiber Interface Card:
Fiber Optical	PN-M10	0	Provides optical fiber interface for T1/E1 Digital
			Trunk Interface (1.5 M/2 Mbps) or Remote PIM.
			Line length: 10 km (6.2 miles) or less. Line
			coding: CMI.
			In-Skin Router Card
	PN-RTA	0	10/100BASE-TX:1, 10BASE-T:1, RS2332C(D-
			sub 9pin)
			Maximum 8 cards per PIM
In-Skin Router	PZ-M649	0	T1 Digital Trunk Interface (1.5Mbps) Card
			Mounted on PN-RTA Card
			Provides a built-in CSU.
			Ether Control Card
	PZ-M623	0	Mounted on PN-RTA Card
			Provides one additional 10BASE-T port
			4 or 8 Port Voice Mail card (NEAXmail IM-16LX)
			This card can provide up to 16 ports of digital
	PZ-VM07	4/8	line circuit interface.
NEAXmail IM-16LX			Occupies VM slot and up to one LT slot
			One card per PBX is available.
			4 Port Voice Mail card used to expand from 8 to
	PZ-VM08	8/16	16 ports. Provides one connector for
			Occupies VM slot plus and one LT slots
			External Relay Contact Control/Scanning
			(8-circuit/card)
External Relay	PN-DK00	0	Works in either mode:
			Control	Scanning
Control
			8-circuit	0-circuit
			4-circuit	4-circuit
			0-circuit	8-circuit

UNIVERGE NEAX 2000 IPS Request For Proposal (RFP) Reference Guide	Page 4-13
Issue 6