NEC 2000 IPS manual Features, Service Conditions for H.323

Chapter 13 Voice Over IP (VoIP)

H.323 Features

The following service features are available when connecting with H.323 terminal (NEC product). For other vender products, confirmation test is required.

		H.323 Features
	Call Forwarding-All Calls		Speed Calling-Station
	Call Forwarding-Don’t Answer		Bearer Service
	Call Forwarding-Busy Line		Tandem Switching of TIE Trunks-2/4-Wire
	Split Call Forwarding		The Line Connection with PAD Control
	Call Transfer-All Calls		Outgoing Trunk Busy Announcement
	Hotline		Brokerage Hot Line-Outside
	Do not Disturb-Dterm		Least Cost Routing-3/6-Digit
	Calling/Called Number Display		LCR-Time of Day Routing
	Digital Display-Trunk		Attendant Manual Override
	Speed Calling-System		Echo Canceller Control
Service Conditions for H.323

1.The data network used for H.323 must be a corporate Intranet.

2.Gatekeeper is required for H.323 network.

3.IP trunk cards must be connected with a corporate Intranet via a router.

4.CCIS feature key FD is required.

5.Maximum number of nodes in the network depends on the capability of the Gatekeeper.

6.Maximum one IP trunk card can be accommodated per PIM and maximum eight IP trunk cards per system.

7.Maximum voice channels per IP trunk card depends on the payload period as follows (payload period can be assigned in system programming):

Payload Period	Maximum Voice Channels per IP Trunk
	G.729a		G.711		G.723.1
20 ms	6	5			–
30 ms	8	7		8
40 ms	12	10			–

Note: Maximum 96 channels can be provided per system

8.The same IP trunk card cannot be shared with CCIS network via IP and H.323.

9.Tone signals to an extension are provided by the system.

10.When a LAN cable is unplugged from the IP trunk card, the associated calls are disconnected.

11.When connected with the system by other manufacturer, a pre-connection test is required.

12.DTMF Relay is supported.

UNIVERGE NEAX 2000 IPS Request for Proposal (RFP) Reference Guide	Page 13- 19
Issue 6