NEC 2000 IPS manual Line/Trunk LT Cards

Chapter 4 Equipment List

Line/Trunk (LT) Cards

The following table shows a summary of the Line/Trunk (LT) cards for UNIVERGE NEAX 2000 IPS. The LT cards may be installed in slot 00 to 11 of PIM 0-7, with the following conditions:

Line/Trunk (LT) Cards

Function	Name	Port	Remarks
Analog Station			8 Line Analog Station Card
	PN-8LCAA		Message Waiting Control: 8 circuits
		8	Momentary Open: 8 circuits
			Loop Resistance: Max. 600ohms including
			telephone set
			8 Line Analog Station Card
			Caller-ID for Analog Station
	PN-8LCAD	8	Loop Resistance: Max. 600 ohms
			Message Waiting Lamp control
			Momentary Open for each circuit
			8 Line Analog Station Card
	PN-8LCS		Momentary Open: 8 circuits, Message
		8	Waiting notification via Stutter Dial
			Tone only.
			Loop Resistance: Max. 600 ohms
			4 Line Analog Station Card with MW Lamp
	PN-4LCD-A	4	control, Momentary Open: 4 Circuits
			On-Board power (80V) is included.
			Loop Resistance: Max. 600ohms including
			telephone set
			2 Line Analog Universal Trunk
	PN-AUCA	2	2 Line Long Line Circuit with PFT
			Loop resistance: max. 2500ohms (LLC)
			Two reverse circuits is included
			On Board power (-48V) is included
			4 Long Line Analog Station Card
			Works in either mode:
			Long Line Station (Requires Ferrite Core)
	PN-4LLCB	4	Caller ID (Requires PN-4RSTF-A)
			Loop Resistance:
			Max. 2500ohms including telephone set
			PZ-PW122 is required.
			Can not be used in IPS DM or IPS DMR

Page 4- 8	NEAX2000 IPS Request For Proposal (RFP) Reference Guide
	Issue 6