NEC 2000 IPS manual Equipment List, Module/Installation Hardware, Equipment Name Function Name

Chapter 4 Equipment List

Module/Installation Hardware

This table shows the names and functions of the modules.

Equipment Name	Function Name	Remarks
SN1729 PIMMJ	PIM	Port Interface Module (PIM)
		Maximum 64 physical ports per PIM. Houses two batteries for
		protection from short power interruption (for 30 minutes).
		At maximum configuration, the system consists of eight PIM’s,
		and provides a total of 512 physical ports (64 ports × 8).
SN1730 PIMMK	PIM	Port Interface Module (PIM) for Backup CPU System
		Maximum 64 physical ports per PIM.
		Houses two batteries for protection from short power
		interruption (for 30 minutes).
		One PIM is required per Backup CPU System.
COVER PARTS	COVER PARTS	Cover Parts Assembly
ASSEM-A	ASSEM	One cover parts assembly is required for each PIM.
SN1545	BASE/TOP	Base/Top Cover Assembly
BASE	ASSEM	One base and top cover assembly is required for each stack.
SN1731	BATTM	Battery Module for housing PIM or CS (ZT) backup batteries
BATTMH		Houses two pairs of batteries for protection from long power
		interruption (for 3 hours).

UNIVERGE NEAX 2000 IPS Request For Proposal (RFP) Reference Guide	Page 4-1
Issue 6