Chapter 9 Feature Descriptions
Page 9- 10 UNIVERGE NEAX 2000 IPS Request for Proposal (RFP) Reference Guide
Issue 6
Automatic Change to Daylight Saving Time
This feature allows the 2000 IPS system clock
to automatically change from standard time to
daylight saving time, and vice versa. Schedule
to change to/from daylight saving time is
programmed by system data programming.
Automatic Number Identification (ANI)
This feature receives the calling subscriber's
number automatically sent from T1 network
using MF signaling and displays the calling
number on the LCD of a Multiline Terminal
and an Attendant Console.
Automatic Recall
This feature works as a timed reminder. When
a call remains on Hold, Camp-On or ringing
unanswered for a fixed interval after being
transferred, the station that initiated the hold,
transfer, or Camp-On is automatically alerted.
Automatic Wake-up
This feature allows the system to be
programmed to automatically call guest rooms
or administration stations at specified times.
Upon answering, the guest is connected to a
recorded announcement or music source. A
printout of unanswered or blocked Automatic
Wake-Up attempts for each guest room is
provided using the Hotel/Motel printer.
Background Music
Background Music can be provided on a dial-
up basis over legacy Multiline Terminal
speakers. Incoming voice announcements,
ringing and recalls override Background
Music. Up to 10 music programs can be
offered.
Back Up CPU
UNIVERGE NEAX 2000 IPS provides a dual
CPU system with two MP cards. When
Emergency Notification from hardware is
detected, the changeover from an active MP
card to a standby MP card will occur. If the
active MP card becomes out of order for any
reason, the standby MP card starts up
automatically. The standby MP card employs
a Cold Standby System that will restart
initialization by the changeover from the active
MP card.
Bandwidth Control
This feature allows to assign an available
bandwidth threshold for VoIP traffic within a
Location and between Locations, and to
restrict outgoing/incoming calls when the VoIP
traffic exceeds the threshold. The Location is
a group of VoIP devices (IP Enabled Dterm,
IP-PAD, or Peer to Peer IP trunks (built-in IP
trunks)), which the same VoIP
communications parameters such as codec
selection list and ToS field value are
assigned.
When the VoIP traffic over CCIS exceeds the
threshold, the call can be routed to legacy
trunks (TDM network). When exceeding the
threshold, the system can store fault
information and provide external alarm
indication.
Boss / Secretary Calling
A secretary with a Multiline Terminal can use
an appearance of the boss' extension to
screen calls for that extension, and announce
and/or transfer calls to that extension.
Additionally, the secretary can call the boss
during a busy condition and send a Message
Waiting Indication to the boss' station.