NEC 2000 IPS manual Call Handling Features, Convergence Features

Chapter 5 Station Equipment

Call Handling Features

Four Local Soft Key Controls (detail functions are dependent on PBX) Large Message Waiting LED

24 Character, 3-Line LCD

Built-in Headset Jack Connector Note Speed Dial/DSS Buttons Programmable Line Keys with 2-Color LED

Eleven Dedicated Function Keys (Feature, Recall, Conf, Redial, Hold, Transfer, Answer, Speaker, MIC, Directory and Message Note )

Built-in Half Duplex Hands-free Unit

Note: DTR-4D-1 does not include headset jack or directory and message functions

Convergence Features

Two 10/100 full duplex Ethernet ports- One which connects the Dterm IP to the local Ethernet Network, the other provides connectivity for a local workstation.

Three types of powering options:

oLocal AC adapter

oCDP (Cisco Discovery Protocol) power for those infrastructures with an installed base of Cisco gear

oSpare pair power across the Ethernet network.

Transportable QoS, which follows the user no matter where they log in.

oMultiple Voice Coding support, which automatically negotiates to a common setting.

oG.711 providing an international standard for encoding/decoding telephony signals on a 64 Kbps Non-compressed channel.

oIt also supports the compression algorithms G.729A (8Kbps) and G.723.1 (5.3/6.3 Kbps).

Line Conditions

ITR-4D-1

ITR-8D-3

ITR-16D-3

ITR-16LD-3

ITR-32D-3

Max. 328 ft. between Ether/IP-PAD and Router/ Switching Hub

Page 5- 4	UNIVERGE NEAX 2000 IPS Request For Proposal (RFP) Reference Guide
	Issue 6