Chapter 4 Equipment List

Line/Trunk (LT) Cards (Cont.)

 

Function

 

 

Name

 

Port

 

 

Remarks

 

 

 

 

 

 

 

 

 

 

32-channel IP-PAD card:

 

 

 

 

 

 

 

 

 

 

• Provides Packet Assembly/Disassembly to

 

 

 

 

 

 

 

 

 

 

accommodate Legacy Line/Trunk interface.

 

 

 

 

 

 

 

 

 

 

• Used with a maximum of two 16VCT cards.

 

 

 

 

 

 

 

 

 

 

• Two cards can be accommodated per built-in

 

 

 

 

 

SPN-32IPLAA IP

 

 

 

 

FP/FP card, a maximum of eight per system.

 

 

 

 

 

 

 

 

 

• 100 BASE-TX twisted pair cable is connected

 

 

 

 

 

PAD-E

 

32

 

 

 

 

 

 

 

 

 

 

directly to this card.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• Supports T.30 or Pass-Through Fax

 

 

 

 

 

 

 

 

 

 

(G.711/G.726). 16VCT is not required

 

 

 

 

 

 

 

 

 

 

for G.711, 16VCT is required for

 

 

 

 

 

 

 

 

 

 

G.726. (R9 enhancement).

 

 

 

 

 

 

 

 

 

 

Auto-Negotiation or 100Mbps Full Duplex is

 

 

 

 

 

 

 

 

 

 

selectable.

 

 

 

 

 

 

 

 

 

 

8-channel IP-PAD Card

 

 

 

 

 

 

 

 

 

 

Provides LAN Interface, Packet Assembly/

 

 

 

 

 

 

 

 

 

 

Disassembly to accommodate Legacy

 

 

 

 

 

 

 

 

 

 

Line/Trunk interface. And provides voice

 

 

 

 

 

 

 

 

 

 

compression DSP control functions such as

 

 

 

 

 

 

 

 

 

 

voice compression control, DTMF relay.

 

 

 

 

 

 

 

 

 

 

• Voice compression protocols:

 

 

 

 

 

 

 

 

 

 

G.711 (64 kbps), G.723.1 (5.3 Kbps/6.3 Kbps),

 

 

IP PAD

 

 

 

 

 

 

 

G.729a (8 Kbps)

 

 

 

 

 

 

 

 

 

• FAX protocol: Pass-through (G.711, G.726)

 

 

(IP Station

 

 

SPN-8IPLA IP

 

 

 

 

 

 

 

 

 

 

 

 

Auto-Negotiation or 100Mbps Full Duplex is

 

 

Peer-to-Peer)

 

 

PAD-C

 

8

 

 

 

 

 

 

 

 

 

selectable.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

When mounting 24DSP (PZ-24IPLA) card, this

 

 

 

 

 

 

 

 

 

 

card can provides up to 32-channel of IP-PAD

 

 

 

 

 

 

 

 

 

 

(When using G.723.1, provides up to 24-channel

 

 

 

 

 

 

 

 

 

 

of IP-PAD).

 

 

 

 

 

 

 

 

 

 

Two cards can be accommodated per built-in

 

 

 

 

 

 

 

 

 

 

FP/FP card, maximum 8 per system.

 

 

 

 

 

 

 

 

 

 

10BASE-T/100BASE-TX twisted pair cable is

 

 

 

 

 

 

 

 

 

 

connected directly to this card.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

24-channel IP PAD and VCT daughter board.

 

 

 

 

 

PZ-24IPLA

 

24

 

 

Mounts on SPN-8IPLA to provide up to 32

 

 

 

 

 

 

 

 

G.711, G.729a and 16 G.723.1 PAD channels.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(T.30/T.38 is not supported)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

16-channel CODEC Card for IP-PAD:

 

 

 

 

 

 

 

 

 

 

• Used with IP-PAD card.

 

 

 

 

 

SPN-16VCTAA IP

 

 

 

 

• Two cards can be accommodated per IP-PAD

 

 

 

 

 

PAD-B

 

0

 

 

card, maximum 16 per system.

 

 

 

 

 

 

 

 

 

 

• Voice compression protocols:

 

 

 

 

 

 

 

 

 

 

• G.723.1, G.729a, G.711,

 

 

 

 

 

 

 

 

 

 

• FAX (14.4 Kbps), DTMF signals.

 

Page 4- 10

NEAX2000 IPS Request For Proposal (RFP) Reference Guide

 

Issue 6

Page 82
Image 82
NEC 2000 IPS manual Pad-E, Pad-C, PZ-24IPLA, SPN-16VCTAA IP, Pad-B