NEC 2000 IPS manual Attendant Answering Position, Attendant Console SN716

Chapter 7 Attendant Answering Position

Attendant Console (SN716)

The Attendant Console (SN716 DESKCON) has an ergonomic design and provides full access to all PBX Console features. The SN716 DESKCON uses the same interface cards as the digital phones to connect to the PBX. The SN716 Desk Console uses a 6-core Modular Jack; inner 1 pair for signal and outer 2 pairs are for power supply to connect to the PBX system.

The SN716 Desk Console operates on a switched-loop basis with a maximum of 6 Attendant loops terminating at each console on the associated Interface card. The Attendant uses these loops for answering, originating, holding, extending, and re-entering calls. When Attendant loop release is used, the number of loops is effectively increased to a maximum of 12 for each console.

UNIVERGE NEAX 2000 IPS Request for Proposal (RFP) Reference Guide	Page 7- 1
Issue 6