NEC 2000 IPS Remote Hold, Remote PIM over IP, Reserve Power, Resident System Program, Room Cutoff

Chapter 9 Feature Descriptions

Soft Keys

According to the status of the Multiline Terminal, function keys (Soft Keys) are displayed in the third line on the LCD. If the status of Multiline Terminal changes, the Soft Keys will change automatically. Also if the Help key is pressed, explanation of indicated Soft Keys are shown on the LCD.

Volume Control

Multiline Terminals are equipped with common Volume Control keys for:

•Built-in Speaker / Handset Receiver Volume

•Ring Volume

•C.O. Transmission Level

•LCD Contrast

•Ring Tone Frequency

Remote Hold

This feature allows a Multiline Terminal user or an attendant to place a call on hold on the line button of the destination terminal, by pressing the Hold key.

Remote PIM over IP

When IPS DMR or 2000 IPS PIM are installed at remote site, and connected to a 2000 IPS or IPS DM at main site over IP network, the Main Site system controls and maintains the remote DMR or IPS PIM operation as one single system. If a communication failure occurs between the Main Site and Remote Site, the Remote Site automatically changes over to a survival mode and operates as a stand-alone system.

IPS DMR: IPS Distributed Model Remote (with

CP31-A/B/C)

IPS DM: IPS Distributed Model (with CP24-A/B/C)

Reserve Power

This feature provides backup power from a 24V battery source in the event of a commercial power failure.

Resident System Program

This feature provides the installers a simple procedure to have the system generate system data according to the system hardware configuration, thereby providing immediate operation and shorter programming time. When activated, the system scans hardware configuration (such as line/trunk card slot location) and assigns system data (such as extension numbers, trunk numbers, etc.) according to a predetermined generic program assignment.

Return Message Schedule Display This feature permits any station user to register his Return Schedule from his phone when he leaves his desk or the premises, and have the Return Schedule displayed on a calling Multiline Terminal with a Liquid Crystal Display (LCD) during his absence.

Room Cutoff

This feature allows the Attendant Console, Hotel/Motel (H/M) Front Desk Instrument, or Property Management System (PMS) terminal, or guest room telephones using a special access code, to temporarily restrict guest room telephones from making unauthorized calls when guests are away from their room, and when rooms are in Check Out status.

Room Status

This feature provides the Hotel/Motel (H/M) Front Desk Instrument with a visual display of the guest's room status. A supplementary print out (individual and summary) can be provided.

Route Advance

This feature automatically routes outgoing calls over alternate facilities when the first choice trunk group is busy. Users select the first choice route by dialing the corresponding access code, and the equipment then advances through alternate trunk groups only if the first choice is busy.

Page 9- 28	UNIVERGE NEAX 2000 IPS Request for Proposal (RFP) Reference Guide
	Issue 6