NEC 2000 IPS manual No CID Call Routing, Off-hook Alarm, Off-Premises Extensions

Chapter 9 Descriptions

Attendant Night Transfer

When the Attendant Console is in Night Service, any operator directed calls (dial 0 calls) are automatically routed to a preprogrammed station. Priority Calls and Off-Hook Alarms which terminate to an Attendant are also routed by this feature.

Call Rerouting

This feature provides flexible reroute capabilities for a variety of calls when the system is in night mode.

Day / Night Mode Change by Attendant Console

This feature provides activation of DAY/NIGHT Mode Change by depressing a predetermined key from the Attendant Console.

Day / Night Mode Change by Station Dialing

This feature allows selected stations to activate a change from day mode to night mode by dialing a special code.

Day / Night Mode Change by System Clock

This feature provides automatic activation of DAY/NIGHT Mode

Change by using System Clock.

Night Connection - Fixed

This feature allows incoming calls normally terminated to the Attendant to reroute to a predetermined station when the system is placed in Night Service.

Night Connection - Flexible

This feature provides incoming calls normally terminated to the fixed night station to be Call Forwarded to another station.

Trunk Answer Any Station (TAS)

This feature allows any station, other than one with incoming restrictions, to answer incoming calls when the system is in the night mode. When this feature is activated, incoming exchange network calls will activate a common alert signal at the customer premises. By dialing a specified code, any station may answer the call and then extend it to any other station by means of the Call Transfer feature.

Overflow for TAS Queue

If the TAS call is not answered by predetermined time, the call will be forwarded to predetermined station/Attendant Console/Announcement Service.

Queue Limit for TAS

When a DID call is converted to TAS and the number of using lines reaches queue limit, this feature provides the system to restrict the next call terminating.

No CID Call Routing

This feature allows designating a call terminating system based on the reason for the absence of calling party number received from the network.

Off-hook Alarm

This feature allows a station user to call the Attendant, or a pre-designated station, by simply staying off-hook for a preprogrammed period of time. The calling number is automatically displayed at the Attendant Console, or the pre-designated station if equipped with an LCD.

Off-Premises Extensions

This feature allows the connection of a single line telephone in an off-premises location. The connection to the Off-Premises Extension can be through direct copper or through the local telephone company.

Open Application Interface (OAI) Provides a computer-to-PBX interface, allowing a computer to control the function of the UNIVERGE NEAX 2000 IPS. The IPS can be customized to accommodate most customer applications. Application software can be provided by NECAM, an outside software house, or a customer.

.

UNIVERGE NEAX 2000 IPS Request for Proposal (RFP) Reference Guide	Page 9- 25
Issue 6