NEC 2000 IPS Mobility Access, Modem over IP, MP Program Download FTP, Multiple Language Display

Chapter 9 Feature Descriptions

Wide Area Telephone Service (WATS) Access

This feature allows any station user direct dial access to outgoing WATS lines.

Mobility Access

This feature allows a user to make/receive telephone calls from a remote location using a Mobile/Cell Phone via the PBX, as if the user was at his/her desk phone.

Modem over IP

This feature allows the system to transmit modem communications over IP network, via Local Area Networks (LAN) and corporate Wide Area Network (WAN). IP Packet Assembler/Disassembler (IPPAD) and Voice Compression Trunk (VCT) are required for modem over IP network. The modem transmission procedure (G.711/G.726 pass- through) is supported using the 8IPLA/24IPLA IP-PAD only.

MP Program Download (FTP)

UNIVERGE NEAX 2000 IPS provides Online MP Program Download via IP network. The IPS downloads the MP upgrade program from FTP server using MATWorX. Immediate or scheduled changeover to the upgrade program is available. It is also possible to change back to the previous program that was in use before the changeover (changeback).

Multiple Language Display

A language displayed in the LCD of a Multiline Terminal and Attendant Console can be selected on a per-station basis or on a per- operator console basis. The available languages are the same as used on a system- wide basis.

Multiline Terminal Attendant Position A Multiline Terminal with LCD can be programmed to function similar to an Attendant position. This Attendant position has limited access to Attendant related features and functions and can be substituted where an Attendant is required but an Attendant Console is not necessary. When an DCU-60-1 unit is associated with this Attendant Multiline Terminal enhanced operation is available.

Music on Hold

This feature plays music when a line is placed on hold. Music is provided by a circuit board memory chip, IP adpter, or a local music source, such as a CD player or a radio.

Night Service

This feature provides a variety of methods for handling incoming calls when the system is in night mode. These include:

•Attendant Night Transfer

•Call Rerouting

•Day/Night Mode Change by Attendant Console

•Day/Night Mode Change by Station Dialing

•Day/Night Mode Change by System Clock

•Night Connection-Fixed

•Night Connection-Flexible

•Trunk Answer Any Station (TAS)

•Overflow for TAS Queue

•Overflow Limit for TAS

Page 9- 24	UNIVERGE NEAX 2000 IPS Request for Proposal (RFP) Reference Guide
	Issue 6