NEC 2000 IPS manual Dterm Series E Soft keys, Standard features

Chapter 5 Station Equipment

Dterm Series E (Multi-line Digital Terminals)

The Dterm Series E terminals were strategically designed to provide ergonomic form and user- friendly functions. With advanced digital circuitry, the Dterm Series E terminals consist of five distinct telephone models and one DSS/BLF console to meet users’ diverse terminal needs. The Dterm Series E family of terminals offers adjustable display and non-display units with menu-driven soft key operation, allowing users to program terminals at the desktop. The display units are equipped with large LCD panels with three lines of display, each with 24 characters. Each terminal offers an optional full duplex speaker phone operation for two-way conversation. Standard features include headset jacks, wall mount units and adjustable base units. Laser printer designation cards are available in Metallic Green (MG), Black (BK) and Soft White (WH).

Standard features

HOLD – Press key to place an internal or external call on hold.

TRANSFER – Allows the station user to transfer established calls to another station without attendant assistance.

ANSWER – When LED on this key is lighted, press key to answer a waiting call. SPEAKER – Controls the built-in speaker that can be used for Hands Free Dialing/Monitoring and Voice Call.

REDIAL – Press key to activate redial feature. Press redials and scrolls back through numbers that have been dialed. When desired number is displayed, press the * key to activate dialing.

CONF – Press key to establish a three-way conversation.

RECALL – Press key to terminate established call and re-seize internal dial tone. FEATURE – Used to activate terminal setup functions and to program One-Touch Speed Dial/Feature Keys.

MIC – Press to turn on and off the microphone.

Dterm Series E Soft keys

The Dterm Series E Display Terminals have four Soft keys located just under the Display of each Terminal. These menu-driven Soft keys allow user’s convenient access too many features. Each Soft key may have up to 4 features programmed on it. Soft keys will be functional for specific states of the terminal such as idle, during dialing, ringing, etc. The state of the terminal will determine what Soft key is available to the user. According to the status of the Multiline Terminal, functions of the Soft keys are displayed in the third line on the LCD and if the status of the Multiline Terminal changes, the Soft Key displayed will change automatically. Also if the HELP key is pressed, an explanation of the indicated Soft key is shown on the LCD. Typical Soft key Applications are Business, Hotel, Multi-tenant and Networking applications where it is necessary to save key space on the telephone and also provide a variety of quickly accessible features.

Page 5- 8	UNIVERGE NEAX 2000 IPS Request For Proposal (RFP) Reference Guide
	Issue 6