NEC 2000 IPS manual Required Equipment for Digital Ccis, Required Equipment for Analog Ccis

Chapter 14 Common Channel Inter-Office Signaling (CCIS)

Required Equipment

Required Equipment for Digital CCIS

EQUIPMENT	FUNCTIONAL	FUNCTION
NAME	NAME
PN-24CCTA	CCT	CCIS (1.5 Mbps) Trunk Card
		Provides a built-in Common Channel Handler (CCH) of CCIS.
PN-24DTA-C	DTI	T1 Digital Trunk Interface (1.5 Mbps) Card
		Accommodates 24-channel PCM digital lines.
PN-30DTC-C	DTI	E1 Digital Trunk Interface (2 Mbps) Card
		Accommodates 30-channel PCM digital lines.
PN-SC00	CCH	Common Channel Handler Card
		Transmits/receives signals on the common signaling channel of
		CCIS.
PN-M10	M10	Optical Fiber Interface Card
		Provides optical fiber interface for T1/E1 Digital Trunk Interface
		(1.5 M/2 Mbps) Line length: 6.2 miles (10 km) or less
		Line coding: CMI

Required Equipment for Analog CCIS

EQUIPMENT	FUNCTIONAL	FUNCTION
NAME	NAME
PN-SC00	CCH	Common Channel Handler Card
		Transmits/receives signals on the common signaling
		channel of CCIS.
PN-2ODTA	ODT	2-line Out Band Dialing Trunk Card
		Used as either a 2-wire E&M trunk or a 4-wire E&M
		trunk.
		Equipped with –48V DC-DC on-board power supply.
		Both Circuits 0 and 1 must be set to the same
		purpose
		(2-wire or 4-wire) in one card.

Required Equipment for CCIS Networking via IP

Description	Remarks
CCIS via IP (non Peer-to-Peer)
SPN-IPTB	Network Interface:
	ETHER/FAST ETHER
SPN-4VCTI	Codec Card for IP Trunk
CCIS via IP (Peer-to-Peer)
PZ-M606-A	On board Ethernet Interface Card
	(ETHERNET TCP/IP)
SPN-8IPLA IP PAD-C	IP Interface card for IP Pad
PZ-24IPLA	24-channel daughter board for 8IPLA

UNIVERGE NEAX 2000 IPS Request For Proposal (RFP) Reference Guide	Page 14-19
Issue 6