NEC 2000 IPS manual Camp-on, Centrex Compatibility, Check In / Check Out, CID Call Back

Chapter 9 Feature Descriptions

Camp-on

This feature provides selected stations or outside calls with Camp-On capability to a busy internal station. Two Camp-On methods are provided. The call waiting method allows a station or an outside party to camp itself on to a busy station. The transfer method allows a transferred outside call to be camped-on to a busy station.

Centrex Compatibility

A combination of features allows full integration of the UNIVERGE NEAX 2000 IPS with Centrex service.

Check In / Check Out

When this feature is activated, the following operations occur:

• Check In

Room Cutoff is cleared.

• Check Out

Room Status printout is supplied.

Do Not Disturb is reset.

Room Cutoff is set.

Message Waiting is reset.

Automatic Wake Up is cleared.

CID Call Back

When an incoming call is terminated from station and trunk with Caller ID (calling number information), and called station does not answer, the calling number is registered to the system memory and MW lamp is lit. After the calling number is registered, by operating from station, confirmation / delete / call back is available. Besides, when the called station answers, the calling number is also registered to the Last Number Redial memory. The station can search and call back to that number by the operations of Last Number Redial / Stack Dial feature.

CID Call Routing

This feature allows designating a call terminating system based on the calling party number received from the network.

Class of Service

This feature permits all stations to be assigned a Class of Service in accordance with the degree of system use desired. The Class of Service is used to assign restrictions for trunk access and feature access.

Code Restriction

This feature allows the UNIVERGE NEAX 2000 IPS to be programmed to restrict outgoing calls according to specific area and/or Central Office codes. This restriction is controlled on the basis of a three-digit area code or six-digit area and office code numbering plan.

Conference (Three/Four Party)

This feature provides a station user the ability to add-on another party (trunk or station) to a call already in progress. Single Line Telephone users can add up to one additional party and Multiline Terminal users can add up to two additional parties.

Page 9- 14	UNIVERGE NEAX 2000 IPS Request for Proposal (RFP) Reference Guide
	Issue 6