NEC 2000 IPS manual IPS DMR Capacity, DTI Isdn, IPS Pimmj As Remote PIM Capacity

Chapter 1 Introduction

IPS DMR Capacity

Number of PHYSICAL MODULAR CHASSIS				Capacity Per MC
				1			2
LT card	Note 1		No. of ports	56		112
			No. of cards	7		14
AP card			No. of ports	Max. 256 ports per network
			No. of cards	7		14
IP-PAD			No. of channel	32		64
Single Line Telephone (Lines)			8LC	56		112
Dterm(Lines)			Standard	56		112
			Long Line	8		16
DtermIP/DtermIP/INASET(Peer to Peer Connection) Note 2					128
			Loop Start	56		112
Central Office Trunk (Lines)			DID w/4DID	28		56
			2W/4W E&M	14		28
DTI			1.5M	7		10
ISDN			1.5M(PRT)	7		8
			4BRT (card)	5		10
PFT Connections				4		8
		IPS PIMMJ (As Remote PIM) Capacity
Number of PHYSICAL PIMS				Capacity Per PIM
				1			2
LT card			No. of ports	64		128
			No. of cards	8		16
AP card			No. of ports	Max. 256 ports per network
			No. of cards	12		24
IP-PAD			No. of channel	32		64
Single Line Telephone (Lines)			8LC	64		128
Dterm(Lines)			Standard	64		128
			Long Line	24		48
DtermIP/DtermIP/INASET(Peer to Peer Connection) Note 2					128
			Loop Start	64		128
Central Office Trunk (Lines)			DID w/4DID	48		96
			2W/4W E&M	24		48
DTI			1.5M		10
ISDN			1.5M(PRT)		8
			4BRT (card)	6		12
PFT Connections				8		16

Note 1: Each Modular Chassis has 24 Virtual LT Ports that can only be used to expand the PAD channels from 8 to 32 using the 8IPLA w/24IPLA.

Note 2: Remote PIM’s Support up to 2 Virtual PIM’s for assignment of DtermIP/DtermIP/INASET only.

Page 1-24	UNIVERGE NEAX 2000 IPS Request for Proposal (RFP) Reference Guide
	Issue 6