NEC 2000 IPS manual Service Conditions for Dterm Analog EXT

Chapter 5 Station Equipment

Service Conditions for Dterm Analog EXT

911 calls should not be made via remote terminals since the telephone number at the PBX location is sent to the emergency center. The user should use a separate line that is not connected to the Dterm EXT system.

If a dedicated line is used, it should be an unlisted number in order to minimize busy signals. No custom calling features, such as Call Waiting or Call Forwarding, should be ordered for the line to which you connect the Remote Module.

Note: A Call waiting tone causes an interruption in data transfer between the Office and Remote Module.

When you use voice and data simultaneously, the voice transmission will have priority over the data transmission regarding available bandwidth allocation.

Up to 100 passwords can be programmed into each Office Module.

Only one Remote Module at a time can be “online” with an individual Office Module.

If passwords have been enabled on the Office Module, authorized connections require a password, 8 to 10 digits in length.

Passwords are retained in non-volatile memory and are not affected by power outages.

Each password begins with two digits (00-99). These digits uniquely identify up to 100 users. The 00 password is reserved for the System Administrator and can be used to change any of the user’s passwords.

Zone paging and voice paging must be turned off via PBX programming on the ports connected to the Dterm Analog EXT. The remote telephone should be programmed to ring for all incoming calls.

If the remote Multiline Terminal is programmed to answer multiple calls, these calls should ring at the terminal. Configure secondary incoming extensions for ringing.

Analog fax machines and modems are not operable with the DTP-32DE-1 Multiline Terminal when connected to the APR-U optional adapter.

The NEC Dterm Cordless and Dterm Cordless Lite telephones cannot be used in conjunction with the DTP-32DE-1 Multiline Terminal and Dterm Analog EXT.

The NEC CTA-U optional adapter cannot be installed to a NEC PBX remote Multiline Terminal to provide TAPI functionally with the PBX.

The auto answer feature for PBX ACD is not operable while in Call on Demand mode. The Dterm PC and Dterm PC II are not functional with the Dterm Analog EXT.

The HFU-U hands free adapter is not operable with the DTP-32DE-1 Multiline Terminal for Dterm Analog EXT operation when used in a home environment due to FCC restrictions. However, it is permitted for use in an office environment.

UNIVERGE NEAX 2000 IPS Request For Proposal (RFP) Reference Guide	Page 5-27
Issue 6