NEC 2000 IPS manual Hardware Required for PMS, Description Qty Remarks, RS PRT-4S CA-A

Chapter 10 System Input/Output (I/O) Interfaces

Service Conditions

1.Only one Interface Port can be provided for PMS.

2.The system sends information relating to the following features to the PMS upon request from the PMS:

Do Not Disturb Room Cut-off

3.The UNIVERGE NEAX 2000 IPS system can support PMS Model-60 via AP00-B or PMS Model 90/120 via TCP/IP connection.

4.The AP00-B with MRC-F program is used for Executed task Print out Request for MP Built-in PMS.

Hardware Required for PMS

Description	Qty	Remarks
SPN-CP24-C MP (UA)	1 per system	MP
SPN-AP00B MRC-C (AP)	1 per system	Control card for PMS Note
SPN-AP00B MRC-F (AP)	1 per system	Executed Task Print Out for MP PMS Note
PZ-M606-A (ETHER)	1 per system	MP Mounted card One per MP
RS RVS-4S CA-C	1 per SMDR/PMS	AP00-VMS, 13.1ft (4.0m)
RS NORM-4S CA-A	1 per SMDR/PMS	AP00-MODEM, 13.1ft (4.0m)
RS PRT-4S CA-A	1 per Printer	AP00 Printer
PMS Terminal Serial	1 per system	Model 60 only
PMS Terminal over IP	1 per system	Model 90/Model 120
SMDR Terminal	1 per system
Printer	As required
MODEM	As required

Note: Only one AP00 at a time can be mounted in the system.

Page 10-10	UNIVERGE NEAX 2000 IPS Request for Proposal (RFP) Reference Guide
	Issue 6