Chapter 9 Descriptions

PS Authorization

This feature is to confirm the identity of a Dterm PS III to avoid an unauthorized Dterm PS III from accessing the system.

PS Location Indication

When a Dterm PS III calls a Multiline Terminal/Attendant Console or vice versa, this feature allows to indicate the location name of the ZT II that is connected to the Dterm PS III on the LCD of the Multiline terminal.

PS Location Registration

This feature allows the IPS-WCS to supervise the location of each Dterm PS III, upon receiving the location registration request, to allow call termination.

Q931a Roaming Over IP Trunk

Dterm PS III user can originate or receive a call in any place of a network provided by multiple PBXs, which are interfaced by JT- Q931-a protocol over IP Trunks.

Radio Channel Changeover

This feature is to supervise and changeover the channel automatically to avoid the interference and to maintain the speech quality.

Short Message Notification (OAI)

This feature enables a Short Text Message (STM), once arrived at a mail box of the STM Server (external equipment), to be automatically distributed to the addressee Dterm PS III via Open Application Interface (OAI). This feature also provides “TM Full” notification on the display (LCD) of the address D term PSII that is busy. If the Dterm PS III is out of zone, the feature makes retransmission of the STM after the PS returns to the zone.

Soft Phone Wireless Handset

This feature allows a Soft Phone (Dterm SP30) user to use a PS terminal as the handset of the Soft Phone. The user can select a handset (Soft Phone Handset or PS) by pressing the Handset Switch key on the Soft Phone.

Speech Encryption

This feature protects a call from being tapped.

Speed Dial-PS

This feature allows a Dterm PS III user to dial the certain frequently called numbers using two-digit abbreviated call codes.

Station Hunting - Not Available

This feature allows a call placed to a Dterm PS III station, which is out of zone or power off to be forwarded to an idle station in a hunt group. Two Station Hunting arrangements are available. Station Hunting - Circular processes the call regardless of which station in the hunt group is called. Station Hunting - Terminal initiates a hunt only when the pilot number of a hunt group is called.

Voice Mail Indication

When a message is mailed in the Dterm PS III, an indication of the envelope icon is displayed in the LCD of the Dterm PS III.

WLAN Handset Registration/Service

This feature allows the 2000 IPS to accommodate the WLAN Handset as a station. A terminal is connected to the 2000 IPS through Access Point and Gateway and operates under the control of the virtual CS on the Gateway. Station-to-Station calls between WLAN stations and calls between WLAN stations and existing stations/trunks are available.

UNIVERGE NEAX 2000 IPS Request for Proposal (RFP) Reference Guide

Page 9- 49

Issue 6

 

Page 195
Image 195
NEC 2000 IPS manual This feature protects a call from being tapped