Chapter 9 Feature Descriptions

Optical Interface

The Optical Interface Card (PN-M10) provides an internal optical fiber modem to the T1/E1 or Remote PIM network. The PN-M10 provides a bandwidth of 6.3 Mbps and supports a maximum distance of 10 kilometers (or 6.25 miles) point to point. The UNIVERGE NEAX 2000 IPS only supports Single Mode optical fiber

Pad Lock

This feature temporarily restricts telephones from making unauthorized calls by dialing special access code when station users are away from their seats.

Periodic Time Indication Tone

This feature provides a periodic tone to the station user who has made an outgoing call. This feature can be allowed or denied for each station.

Pooled Line Access

A line key can be assigned to access Pooled Lines. Each line key will allow incoming, outgoing, or both-way access to a trunk route.

Power Failure Transfer

This feature provides for specified trunks to be automatically connected to designated Single Line Telephones in the event of AC power loss. It is normally used when the system is not equipped with reserve power.

Priority Call

This feature allows the Attendant to answer a call before other calls, at the Attendant's discretion.

Privacy

This feature restricts Multiline Terminal users from depressing a busy line button and entering a conversation unless permitted by the Multiline Terminal user currently on that line button or if the line button is assigned for Direct Privacy Release.

Direct Privacy Release

This feature allows a station user with a secondary appearance of another extension in the system to access that extension when it is being used by someone else. This feature allows for a simplified method for establishing a conference. In addition, this feature can be used to emulate PC dialing, where a single line extension connected to a PC can appear on a Multiline Terminal and be accessed by the Multiline Terminal user after the PC is completed dialing.

Manual Privacy Release

This feature allows a Multiline Terminal user to enter a conversation on a busy line button if the Multiline Terminal user already in the conversation allows them by releasing Privacy.

Private Lines

Only a C.O. trunk assigned to that specific station is seized when a station user originates an outgoing C.O. call or when an incoming C.O. call is terminated at the station designated by Direct-In-Termination. In this manner, stations and C.O. trunks are to be associated on a 1-to-1 basis.

Property Management System Interface

The UNIVERGE NEAX 2000 IPS provides a data interface to a locally provided Property Management System (PMS). This enables communication between the UNIVERGE NEAX 2000 IPS and the PMS in order to provide computer control of Hotel/ Motel features.

Proprietary Multiline Terminal

The are several Multiline Terminals available which can be used with the UNIVERGE NEAX 2000 IPS.

Legacy: Dterm Series i

Legacy: Dterm Series E (Display/Non-Display)

Dterm IP: Dterm Series E/Series i (Display)

Legacy: Electra Elite(Display/Non-Display)

Page 9- 26

UNIVERGE NEAX 2000 IPS Request for Proposal (RFP) Reference Guide

 

Issue 6

Page 172
Image 172
NEC 2000 IPS manual Optical Interface, Pad Lock, Periodic Time Indication Tone, Pooled Line Access, Power Failure Transfer