NEC 2000 IPS manual Feature Descriptions

Chapter 16 Wireless System

Feature Descriptions

Feature	Description
Analog PBX	This feature allows the IPS/WCS to be integrated with many types of
	PBXs and to activate various PBS services by sending hook flash
Interface
	signal and DTMF tone.
Announcement	This feature allows calls to a Dterm PS III, which cannot be paged, in
	a predetermined period of time to be routed to the announcement
- PS No Answer	notifying the calling party that the Dterm PS III cannot answer.
/Announcement	Announcements can be divided between Announcement - PS No
- PS Out of	Answer and Announcement - PS Out of Zone depending on the
Zone
	Dterm PS III condition.
Automatic	When a Dterm PS III user engaged in a call moves out of the service
	area or enters a radio zone where all the channels are busy and the
Release - Out
	communication becomes unavailable, the call will be disconnected
of Zone Calls
	automatically, and the other party receives reorder tone.
	When a PS is power off or out of zone, a call directed to the PS is
Call Forwarding	forwarded to a VMS, and a voice mail message can be recorded to
- Not Available	the VMS and checked from the PS. Also the VMS can page the PS
	automatically after the voice mail message is recorded.
CCIS Interface	This feature allows the IPS/WCS to be integrated with NEC PBXs
	with CCIS interface.
Calling Name	Without answering incoming calls or hold calls terminates to the
	Dterm PS III, the calling party’s name can be confirmed by the
Display – PS
	indications on the LCD.
Calling Number	This feature provides a display on the LCD of a Dterm PS III
Display – PS	receiving a call, indicating the station number.
DTMF Signal	This feature allows a Dterm PS III user to send the DTMF signal
	(tone) to the called party (terminal, voice mail system, etc.) while
Sender
	engaged in communication.
	This feature permits a Dterm PS III user, Dterm user or Single Line
Group Call -	Telephone user within the system to establish a conference among
	as many as six or ten parties. From a Dterm PS III/Dterm /Single Line
Automatic
	Telephone, a maximum of 9 PSs can be paged simultaneously
Conference
	except the conference leader. The PSs are assigned to the
(6/10-Party)
	simultaneous paging groups as a participant by the system data
	beforehand.

UNIVERGE NEAX 2000 IPS Request For Proposal (RFP) Reference Guide	Page 16-9
Issue 6