NEC 2000 IPS manual Feature Activation from Secondary Extension, Flexible Line Key Assignment

Chapter 9 Feature Descriptions

Feature Activation from Secondary Extension

This feature allows the Multiline Terminal user to access an appearance of another extension and program certain features from that extension.

Flexible Line Key Assignment

Multiline Terminals can have any desired line- key assignment. This feature permits assignments to be tailored to each individual's needs. (The terminal's primary extension line appearance is the only line key that cannot be reassigned.)

Flexible Numbering Plan

The UNIVERGE NEAX 2000 IPS has a Flexible Numbering Plan. All access codes and station numbers and can be assigned in system programming. Refer also to the Single Digit Dialing Features and Specifications, which further increases the flexibility of the system.

Flexible Ringing Assignment This feature allows lines on Multiline Terminals to be individually programmed to ring or not ring.

Forced Account Code

This feature forces the user to enter an Account Code (up to 8 or 10 digits) for all outgoing calls. The Account Code must be dialed before dialing the outgoing number. Calls are processed only when the dialed Account Codes are valid.

Group Call -

Automatic Conference (6/10 Party)

This feature allows a Multiline Terminal user or single line telephone user within the system to establish a conference among as many as six or ten parties. From a Multiline Terminal /Single Line Telephone, a maximum of 9 stations can be paged simultaneously plus the originator. The stations are assigned to the simultaneous paging groups as participants by the system data beforehand.

Group Call - 2 Way Calling

This feature allows a Multiline Terminal/Single Line Telephone to page a maximum of fifteen parties simultaneously including the originator. After one of paged parties answers, the paging becomes the 2 Way Calling between the originator and the first answered party, automatically stops paging other parties. The stations are assigned to the simultaneous paging groups as participants by the system

data beforehand.

Group Call by Pilot Number Dialing This feature allows a station user (Multiline Terminal / Single Line Telephone / PS) or a trunk party to page a group of stations simultaneously by dialing a pilot number. The maximum of 32 stations can be assigned to a paging group, and the paging group is associated with the pilot number. After one of the paged stations answers, the paging becomes a 2 way calling between the calling party and the first answered station and automatically stops paging other stations.

Group Listening

When a Multiline Terminal user makes a call using the handset, pressing the SPKR key will allow others to listen through the built-in speaker of the Multiline Terminal. The user may continue talking on the handset at the same time.

Page 9- 20	UNIVERGE NEAX 2000 IPS Request for Proposal (RFP) Reference Guide
	Issue 6