NEC 2000 IPS manual Automatic Idle Return

Chapter 9 Descriptions

Automatic Idle Return

This feature returns a station to the idle state after 3 seconds of reorder tone is received due to the distant end disconnecting.

Called Station Status Display

This feature provides a display on the status of a called station on the LCD of the calling Multiline Terminal.

Calling Name and Number Display

This feature provides a display on the LCD of the Multiline Terminal receiving a call, indicating the station number/trunk number of the incoming call.

Group Feature Key

A station user can monitor the status of group member stations such as idle, busy, hold and ringing by lamp indication of the multiple line keys. If a line is idle, a station user can make a call to the member station by pressing the associated line key (instead of pressing DSS key). If a line is ringing or is on hold, a station user can pick up the incoming call or the call on hold by using My Line, and the ringing or held line is made idle.

Dynamic Dial Pad

This feature allows a user to make an outgoing call by first pressing a key on the keypad of Multiline Terminal without pressing the Speaker key or going off-hook.

Handsfree Unit

The built-in Handsfree Unit enables full Handsfree operation for both internal and external calls (No optional Handsfree Unit is required).

I-Hold / I-Use Indication

Multiline Terminals provide indication of which line keys have been placed on Hold, or are in use by that Multiline Terminal. The LED associated with the line key will give the appropriate indication.

Microphone Control

All Multiline Terminals are equipped with a Microphone Control button with an associated LED.

Multiple Line Operation

This feature allows for the appearance of multiple lines on the Flexible Line Keys and feature keys of all Multiline Terminals.

Mute Key

This feature allows the distant extension user, of a station user that presses a mute key during conversation, not to hear the station user's voice though the station user can hear the distant extension user's voice. By pressing the mute key again, the mute status returns to original conversation.

My Line Number Display

This feature allows the display of the Prime Extension in the LCD display of the Multiline Terminal during an Idle state.

Preset Dialing

This feature allows a Multiline Terminal user to prepare and verify a number in the display on the LCD before dialing. When a wrong number is entered, the user can correct the number before originating the call.

Prime Line Pickup

This feature allows a Multiline Terminal user to go off hook and originate a call from the line assigned as the Prime Line without depressing the associated line key.

Recall Key

Each Multiline Terminal is equipped with a Recall Key that is used to generate a hookflash to access features provided by the outside exchange, or to abandon a call while retaining the line for origination of another call.

Relay Control Function Key

This feature provides a Multiline Terminal with the ability to activate/deactivate relays (on a PN- DK00) to control external devices.

Ring Frequency Control

The ring frequency of the Multiline Terminal can be controlled on a station basis in system programming (eight ro fourteen frequencies are available) or by use of a function key on the Multiline Terminal.

Ringing Line Pickup

This feature provides the ability to answer any call ringing into a Multiline Terminal by just lifting the handset.

UNIVERGE NEAX 2000 IPS Request for Proposal (RFP) Reference Guide	Page 9- 27
Issue 6