IBM 8840 manual Original /boot/grub/grub.conf contents

kernel /vmlinuz-2.4.9-e.12smp ro root=/dev/hda6 console=tty1

console=ttyS0,19200

initrd /initrd-2.4.9-e.12smp.img

Note: The entry that begins with kernel /vmlinuz is shown with a line break after console=tty1. In your file, the entire entry must all be on one line.

The following examples show the original content of the /boot/grub/grub.conf file and the content of this file after modification.

Original /boot/grub/grub.conf contents

#grub.conf generated by anaconda

#

#Note that you do not have to rerun grub after making changes to this file

#NOTICE: You have a /boot partition. This means that

#all kernel and initrd paths are relative to /boot/, eg.

#root (hd0,0)

#kernel /vmlinuz-version ro root=/dev/hda6

#initrd /initrd-version.img

#boot=/dev/hda

default=0

timeout=10

splashimage=(hd0,0)/grub/splash.xpm.gz

title Red Hat Enterprise Linux ES (2.4.9-e.12smp) root (hd0,0)

kernel /vmlinuz-2.4.9-e.12smp ro root=/dev/hda6 initrd /initrd-2.4.9-e.12smp.img

title Red Hat Enterprise Linux ES-up (2.4.9-e.12) root (hd0,0)

kernel /vmlinuz-2.4.9-e.12 ro root=/dev/hda6 initrd /initrd-2.4.9-e.12.img

28IBM xSeries 346 Type 8840: User’s Guide