Troubleshooting
Access ThinkPad, your on-board help system, provides a full set of
suggestions for troubleshooting. For access to that help system, press the
ThinkPad button. This troubleshooting section deals only with problems that
might prevent you from getting access to Access ThinkPad.
Diagnosing problems
If you have a problem with your computer, you can test it by using
PC-Doctor
®
for Windows
®
. To run PC-Doctor for Windows,do as follows:
1. Click Start.
2. Move the cursor to Programs (in Windows XP,All Programs) and then to
PC-Doctor for Windows.
3. Click PC-Doctor for Windows.
4. Choose either the Quick Test or the Standard Test.
Attention
Running the Quick Test set can take 10 minutes or longer.Make sure
you have time to run the entire test; do not interrupt the test while it is
running.
The Quick Test set runs many tests of critical hardwarecomponents, but it
does not run all of the diagnostic tests in PC-Doctor for Windows. If
PC-Doctor for Windows reports that all of the tests in the Quick Testset have
been run and that it has found no problems, consider running more of the
tests.
If you are preparing to contact IBM for support, be sure to print the test log
so that you can rapidly provide information to the help technician.
Solving computer problems
10 ThinkPad
®
A30 Series Service and TroubleshootingGuide